Researchers Technologies

Technologies and applications available in Technion researcher labs.

 Equipment | Service Features TechnologyPI & Faculty Contact PersonPhoneEmailLink

Ultra high-speed electronic signals test and measurement laboratory

Probe station mounted on an optical table
Keysight UXR0804B UXR Series Oscilloscope (80 GHz, 256 GSa/s, 4 Channels)
Keysight M8199B Arbitrary Waveform Generator (256 GSa/s, 2 Channels)
Keysight N5227B PNA Network Analyzer
Keysight N9020B MXA Signal Analyzer
Keysight E8257D PSG Analog Signal Generator (70 GHz)
Optical-to-electrical converters

State-of-the-art equipment for transceivers characterization up to 224Gb/s, exceeding 70GHz

Ariel Cohen, Electrical and Computer Engineering Faculty | Electrical and Computer EngineeringAriel Cohenphone iconmail iconwebsite icon

ZED 2i (Stereolabs)

"Neural Depth Sensing
Spatial Object Detection
Built-in Next-Gen IMU, Gyroscope, Barometer & Magnetometer
120° Wide-Angle FOV
All-Aluminium Frame with Thermal Control
Optional Integrated Polarizer for reflection removal
IP66 protection from water and dust
Secure USB Type-C connection "

Stereo depth camera with AI and multi-sensor fusion for 3D perception.

Davide Schaumann | Architecture and Town PlanningMichal Cohenphone iconmail iconwebsite icon

Equipment for digitizing analog data, in all types of media and formats.

N/A

Textual, (audio, visual, negatives and film.

Shira Wilkof | Architecture and Town PlanningShira Wilkofphone iconmail iconwebsite icon

UTM with thermal chamber

"Crosshead speed – 0.0001 to 1270 mm/min
Speed accuracy – 0.1%
Max. Crosshead travel – 1070 mm
Load Cell – 5kN and 500N
Test procedures - Tensile, Bending, Flexural, Modulus, Compression, Cycling, Peel, Friction, Puncture, Tear, yield point and etc.
Temperature range: 40 to 280?C (Temp. accuracy – 0.5?C)"

The equipment can perform varieties of mechanical tests for soft materials (biomaterials, rubber composites, hydrogels, SMPs, polymers, etc.)

Prof. Konstantin Volokh | Faculty of Civil and Environmental EngineeringDr. Mohit Goswamiphone iconmail iconwebsite icon

Ultrasonic equipment, transducers, HIFU, ultrasonic tomograph.

N/A

The ultrasonic tomograph was developed and built in the laboratory of Haim Azhari, used to scan women for breast tumors, CT images and projection images such as X-rays but with sound waves.

Azhari Haim | Biomedical EngineeringAzhari Haimphone iconmail iconwebsite icon

The XRF (Malvern Panalytical) system consists of an X-ray tube, detector, sample holder, and dedicated analysis software.

The instrument is equipped with advanced calibration and data-processing capabilities to ensure reliable analytical performance. Additional accessories include sample preparation tools and safety shielding systems that comply with laboratory safety standards. The XRF (X-ray Fluorescence) analyzer enables rapid and non-destructive elemental analysis of a wide range of materials. The system provides high accuracy and repeatability, requires minimal sample preparation, and allows both qualitative and quantitative analysis. It is suitable for analyzing powders and solids materials. Powder samples can be analyzed either as pressed pellets prepared using a hydraulic press or as fused glass beads, enabling accurate and reliable elemental characterization for different research and industrial applications.

The XRF technology is based on the interaction between X-rays and matter. When the sample is exposed to primary X-rays, atoms within the material emit secondary fluorescent X-rays at characteristic energies unique to each element. The detector measures these energies and intensities, allowing identification and quantification of the elemental composition of the sample. This technology provides fast, precise, and non-destructive chemical analysis for a broad range of applications.

Semion Zhutovsky | Faculty of Civil and Environmental EngineeringSmadar Kedemphone iconmail iconwebsite icon

Netzsch STA 449 F5 Jupiter

Thermal gravimetry analysis and differential scanning calorimetry can be performed simultaneously in an inert or oxidizing atmosphere

Thermal gravimetry analysis

Semion Zhutovsky | Civil and Environmental EngineeringSemion Zhutovsky, Smadar Kedemphone iconmail iconwebsite icon

2 Photon intvra vital

N/A

To be purchased next.

Assaf Zinger | Chemical EnigneeringLilach Caspiphone iconmail iconwebsite icon

Tools to measure the unsaturated and saturated hydraulic conductivity of soils, including HYPROP and KSAT (by Meter), and tension infiltrometer (don't remember the firm).

N/A

Tools to measure the unsaturated and saturated hydraulic conductivity of soils, including HYPROP and KSAT (by Meter), and tension infiltrometer (don't remember the firm).

Furman Alex | Civil and Environmental EngineeringFurman Alexphone iconmail iconwebsite icon

Furnaces

N/A

Tube furnaces (1100 C); Box furnace (1500 C)

Yaron Amouyal | Materials Science and EngineeringYaron Amouyalphone iconmail iconwebsite icon

ALD Advanced – Atomic Layer Deposition (ALD) system

Deposition of nano-meter layers of alumina, titania, polymers etc.; 3D objects; multilayering

Ultra-thin films of various materials

Boaz Pokroy | Materials EngineeringIryna Polishchukphone iconmail iconwebsite icon

Balancing and analysis of fsat rotating systems

critcal speeds, rotor balancing

Ultrasonic amplifiers and transducers

Bucher Izhak | Mechanical EngineeringIzhak Bucherphone iconmail iconwebsite icon

Ultrasonic levitation using standing waves

N/A

Ultrasonic tests for defects

Bucher Izhak | Mechanical EngineeringIzhak Bucherphone iconmail iconwebsite icon

Vacuum system for sealing of quartz ampoules

N/A

Vacuum system for sealing of quartz ampoules

Yaron Amouyal | Materials Science and EngineeringYaron Amouyalphone iconmail iconwebsite icon

Topographic measurements of deep grooves and surface properties estimation, using a tapping sensor in resonance

Renanating sensors for distributed sensing

Vibrating nanofiber sensing and surface reconstruction. Tapping sensor adaptive control and sensing

Bucher Izhak | Mechanical EngineeringIzhak Bucherphone iconmail iconwebsite icon

Cascade Summit 12000 Probe Station

Sophisticated and high-performance wafer probing platform for semiconductor testing and device characterization

Wafer Probing

Shahar Kvatinsky | Electrical and Computer EngineeringIlan Lipschutzphone iconmail iconwebsite icon

Small scale waves basin

6 by 6 basin, up to 0.8 m water depth, mechanical wavemakers

Water waves fields and interaction with structures, breaking waves, waves induced currents, flow visualization

Liberzon Dan | Civil and Environmental EngineeringDan Liberzonphone iconmail iconwebsite icon

Medium size wind-wave flume

18 meters long, 1.1 meters wide, water depth of up to 0.8 meters. Waves generation by wind and/or mechanical wavemakers. Wind speeds of up to 20 m/s

Water waves-Atmosphere interactions, breaking waves, waves induced currents, flow visualization

Liberzon Dan | Civil and Environmental EngineeringDan Liberzonphone iconmail iconwebsite icon

Bruker D6 Phaser Diffractometer

XRD for crystal structure analysis.
PDF for short-range order analysis.
X-ray tubes: Cu or Mo.
Sample stages: powder (autochanger, zero-noise background), thin films, capillaries.

X-ray Diffraction, Pair Distribution Function

Arad Lang | Materials Science and EngineeringArad Langphone iconmail iconwebsite icon

Low-Pressure Plasma System

N/A

X-ray laboratory instrument for non-destructive

Boaz Pokroy | Materials EngineeringIryna Polishchukphone iconmail iconwebsite icon

Ultra-small, Small, mid, and wide angle X-ray scattering measurements of solutions, gels, powders, and films

GI-SAXS, WAXS, SAXS, USAXS, shear-cell

X-ray Scattering, Material characterization, data analysis, surface characterization

Lucy Liberman | Chemical EngineeringMikhail Stolovphone iconmail iconwebsite icon
 Equipment | Service Features TechnologyPI & Faculty Contact PersonPhoneEmailLink