ARC. Architecture recources center
| Architecture and town planning
| | Architecture recources center
| Ezra Ozery |
|  |
|
PPS AFX3150 Power Source
| AC+DC, up to 800V, 100A, asymetrical waveforms
| | IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
Bruker Ultima 2-Photon Plus
| Tunable laser (680–1300 nm) and Fixed output: 1045 nm, 4 GaAsP PMT channels, Galvo and resonant scanners, ETL focus
| 2 Photon
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Ambient gas / glove box transfer station for 2D materials
| | 2D materials transfer
| 2D Materials
| Assael cohen |
| |
|
Freestanding transfer station for 2D materials
| | 2D materials transfer
| 2D Materials
| Assael cohen |
| |
|
Bionova X - DLP 3D Bioprinter
| Bioprinting of cells and biomaterials
| 3D Bioprinting
| 3D Bioprinting Center for printing Cells and Biomaterials
| Galia Ben-David |
| |
|
Envision TEC GmbH 3D- Bioplotter Manufacturer
| Multi channel bioprinting of cells and biomaterials
| 3D Bioprinting
| 3D Bioprinting Center for printing Cells and Biomaterials
| Galia Ben-David |
| |
|
3FLEX Porosity Analyzer
| Micromeritics, measuring BET, pore size / volume of micro / meso porous materials
| 3FLEX porosimeter
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
AccuPyc Density Analyzer
| Micromeritics, measuring density of powders, solids, and slurries
| AccuPyc density analyser
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Subsonic Wind Tunnel (14)
| Air speed range 10-90 m/sec, test section 100X100 cm, balance measurements
| Aerodynamic measurments
| Technion Wind tunnel Complex
| Michael Dunaevsky | | |
|
Subsonic Wind Tunnel (15)
| Air speed range 0-50 m/sec, test section 50X50 cm, flow field measurements (PIV)
| Aerodynamic measurments
| Technion Wind tunnel Complex
| Michael Dunaevsky | | |
|
Supersonic Tunnel
| Mach number 1.6-3.5, test section 40X50 cm, balance measurements, Schlieren
| Aerodynamic measurments
| Technion Wind tunnel Complex
| Michael Dunaevsky | | |
|
Transonic Wind Tunnel
| Mach number 0.2-1.1, test section 80X60 cm, balance measurements, Schlieren
| Aerodynamic measurments
| Technion Wind tunnel Complex
| Michael Dunaevsky | | |
|
Wind tunnel accessories
| Design and assembly of wind-tunnel balances for measuring forces and moments from a few grams and up to 250 kg kilograms
| Aerodynamic measurments
| Technion Wind tunnel Complex
| Michael Dunaevsky | | |
|
Atomic Force Microscope with electrochemical capabilities
| The Cypher ES Environmental AFM provides an exceptional performance in resolution, speed and stability in standard contact and tapping modes. It is compatible with a complete range of modes and accessories. In addition, it enables studying samples in controlled gas or liquid environments, doing electrochemical experiments and measuring conductivity of samples.
| AFM
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Single point BET Micromeritis
| iSAF – Single-point SSA (Specific Surface Area) measurement, used to determine the surface area of a material per unit mass, commonly expressed in m²/g. It is a faster alternative to the multipoint BET method, particularly use…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Room temperature GPC
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
GC with TCD and FID detectors
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Small-size reactors
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Potentiometric titrator (751 GPD Titrino, Metrohm)
| iSAF – This instrument can determine the concentration of a given analyte, which helps to determine the amount of ion exchange group of membrane samples.
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Bench Top Manual Presses
| iSAF – Designed for an array of different applications and processes for example; pelletizing, destructive testing, rosin and other fluid extraction, pressure forming, etc.
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Eppendorf Centrifuge 5804
| iSAF – Max. capacity: 4 × 250 mL/2 × 5 MTP, Swing-bucket rotors and adapters accommodate tubes and bottles from 0.2 mL to 250 mL. Plate rotor for centrifugation of all types of MTP, PCR, cell culture, or Deepwell Plates
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Spectrometer + ICCD
| iSAF – o Wavelength range: 300 – 800 nm o Andor iStar ICCD o Gate time: 4 ns
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Laser-induced fluorescence
| iSAF – Nd:YAG + dye laser o Wavelength range: 200 – 600 nm. Rep rate: 20 Hz o Pulse duration: 6-10 ns
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
High-speed imaging
| iSAF – Four mid-IR units (4 – 6 μm) o H2O, CO2, NO, CH2O detections, < 50 mW power, < 10,000 Hz scan rate
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Tunable diode lasers/detectors
| iSAF – Four mid-IR units (4 – 6 μm). H2O, CO2, NO, CH2O detections, < 50 mW power, < 10,000 Hz scan rate
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Hyperspectral Infrared Imaging
| iSAF – Currently being upgraded, Telops Hyper-Cam MWE FAST, Spectral range: 1.5 – 5.4 μm, Spectral resolution: 0.25 – 150 cm-1, Spatial resolution: 320 x 256 pixels, Frame rate: 0.032 – 32 cubes/s, Exposure time: 1 μ…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
High-speed IR imaging
| iSAF – Telops FAST M3k o Spectral range: 1.5 – 5.4 μm. Resolution: 320 x 256 pixels. Frame rate: 3,100 fps (full res) – 100,000 fps (64 x 4 pixels). Exposure time: 1 μs – full frame
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
EQX-850 LDLS – High Brightness, Laser-Driven Light Source
| iSAF – Wavelength Range: 170 nm – 2500 nm Plasma Size (FWHM): With Retro: 140 μm X 290 μm Dual Output: 120 μm X 280 μm Numerical Aperture: 0.58 NA Bulb Lifetime: 10,000 hours Distance of Plasma from Output Window 13.7 mm La…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
LCA
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Combustion test facility for SAF testing
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
UYA 2.4Y.F Ultra-Microbalance
| iSAF – ultra-microbalance is an optimized modern device which features an option of automatic level control (Level SENSING) as one of numerous functions. The practical effect of balance customization are individual user profil…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Greenlight G20 fuel cell testing station
| iSAF – Available with Greenlight's integrated 'Intelligent Fuel Cell Diagnostics' capabilities: FCDX, G20 power range: up to 100 Watts, Manual and automated operation, Emerald control software, Automated scripting capab…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Y&D7300N bench -top robot
| iSAF – This product has a wide range of applications, such as watch, relay packaging, mobile phone key dispensing, mobile phone battery packaging, notebook battery packaging, coil dispensing, PCB binding sealing, IC sealing, h…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
875 Redox Flow Cell Test System
| iSAF – 0.07 A, .07 A, 7 A, 20 A current range, High-current, multi-range potentiostat operates in current - or voltage -controlled operation, ± 5 V operation for non -aqueous electrolytes, Charge/discharge cycling & per…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
WaveDriver 40 DC Bipotentiostat
| iSAF – This WaveDriver® series bipotentiostat/galvanostat is an affordable dual-electrode electrochemical workstation. The WaveDriver 40 is a true integrated bipotentiostat, capable of controlling one or two working electrodes…
| Analyzers, Heaters
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
SPF, NON SPF, Quarantine, Biohazard
| SPF, NON SPF, Quarantine
| Animals in research infrastructure
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Ion Chromatograph
| Determination of anions
| Anion Chromatography
| The Center for Research in Environmental Engineering,
Analytical Laboratory for Micro-Pollutants
| Nura Azzam |
| | |
Arc melting furnace
| Electric arc furnace. The weight of samples is up to 50 g.
| Arc heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
LEAP 6000 XR APT
| Mass spectometry, MCP detector
| Atom Probe Tomography
| The Israeli Center of Atom Probe Tomography (ICAPT)
| Inbar Freilich |
| |
|
Atomic Force Microscope
| Asylum Research / Oxford Instruments MFP-3D Infinity
| Atomic Force Microscopy
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Atomic Force Microscope (DI-3000)
| | Atomic Force Microscopy
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Bruker AFM CellHesion 300
| SmartMapping,Force spectroscopy
| Atomic Force Microscopy
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
JPK NanoWizard AFM (Bruker)
| A very-high-resolution imaging, with precise control of probe-to-sample interactions at high speed
| Atomic Force Microscopy
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
ATOmizer
| Metal atomization (powders production), flexible material processing
| Atomization
| IMT- Israel Institute of Materials Manufacturing Technologies
| Leonid Chernobylskiy |
| |
|
Curing Oven-400v
| Drying cabinet - 200 C (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Depowdering station
| Job box lift station (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Job box and transfer cart
| Printing table with transfer cart (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
M-FLEX (3D printer)
| Powder bed Binder Jetting 3D printer (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Powder recycler
| Powder sieving machine (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Printhead, 80pL
| Binder jetting 3D printer prithead (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
SLA (3D printer)
| SLA polymer 3D printer
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
VH Powder Mixers
| Preparation of powder mixture, capacity 500 liters
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Z-Corp (3D printer)
| Powder bed Binder Jetting 3D printer (Z-Corp)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Octet R8
| Fluidics-free approach to biomolecule kinetic screening and affinity characterization
| Bio-Layer Interferometry (BLI)
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Sample Preparation for Biomedical electron microscopy services
| Sample preparation and acquisition for scanning and transmission electron microscopy
| Biological electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Sandblasting machine
| Removing rust, paint, corrosion from materials.
| Blasting
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
IDEXX Catalist One
| Blood Biochmestry
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
IDEXX Coag Dx
| Blood Coagulation
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
IDEXX ProCyte Dx
| Complite Blood Count
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
IDEXX Vetlab UA
| Urinary Analyzer
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
IDEXX Vetstat
| Electrolyte and Blood Gas Analyzer
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Briviscop 3000H
| Up to 3000 kgf load with 10mm ball indenter
| Brinell Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
C-V Plotter (MDC)
| | C-V measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Avestin EmulsiFlex C3
| An efficient and easy to use technique for cell disruption and liposome/emulsion processing
| Cell Disruption High Pressure Homogenizer
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Nepa21 Super Electroporator
| Cell transfection
| Cell transfection
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Mehoudar Center for Inventors
| Center for Inventors
| Center for Inventors
| Mehoudar Center for Inventors
| Boaz Drori |
| |
|
Wolpert Charpy Impact
| Charpy V,U. Two scales [0-150J and 0-300J] (from -196 deg C up to room temperature)
| Charpy Impact, Analog
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Bruker (Tensor 27) Fourier Transform InfraRed (FTIR)
| Bruker (Tensor 27) Fourier Transform InfraRed (FTIR)
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
CEM Cop. (Discover) microwave reactor
| CEM Cop. (Discover) microwave reactor
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
Horiba Jobin Yvon (LabRAM HR Evolution) Micro-Raman
| Horiba Jobin Yvon (LabRAM HR Evolution) Micro-Raman
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
Jobin Yvon (Fluorolog-3) Fluorometer
| Jobin Yvon (Fluorolog-3) Fluorometer
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
Shimadzu (UV-1800) Spectrophotometer
| Shimadzu (UV-1800) Spectrophotometer
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
TESCAN (Vega-II) Scanning Electron Microscopy (SEM)
| TESCAN (Vega-II) Scanning Electron Microscopy (SEM)
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
Thermo Scientific CHNS Analyzer (Flash2000)
| Thermo Scientific CHNS Analyzer (Flash2000)
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
AutoChem II 2920 Chemisorption Analyzer
| The instrument enables the researcher to obtain valuable information about the physical properties of catalysts, catalyst support, and a variety of other materials. Researchers can investigate active metal surface area, surface acidity, distribution and strength of active sites, BET surface area, and more. The AutoChem II performs pulse chemisorption, temperature-programmed reduction (TPR), desorption (TPD), oxidation (TPO), and reaction analyses. Multiple experiments can be run using the same sample.
| Chemisorption Analyzer
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
GC-MS
| | Chromatography Mass Spectrometry
| Chemical and Surface Analysis Lab
| Larisa Panz |
| |
|
Q-TOF LCMS Bruker
| ESI APCI Solid prob APPI
| Chromatography, Mass Spectrometry
| Chemical and Surface Analysis Lab
| Larisa Panz |
| |
|
Q-TOF LCMS Waters
| ESI
| Chromatography, Mass Spectrometry
| Chemical and Surface Analysis Lab
| Larisa Panz |
| |
|
GC-MS
| Connected to PAL sample injector that enables liquid, headspace and SPME injections with the same autosampler
| Chromatography; Mass Spectrometry
| The Center for Research in Environmental Engineering,
Analytical Laboratory for Micro-Pollutants
| Irena Kuzmenkov |
| | |
EXCITECH CNC ROUTER 5 axis
| Large volume CNC routing machine soft materials
| CNC Routing
| Architecture recources center - Design-tech
| Cris Nannig | | |
|
EXCITECH SHMS1325C CNC ROUTER
| 1.22m * 2.44m work envelope CNC routing machine soft materials
| CNC Routing
| Architecture recources center - TCOM Digital Lab
| Yair Rahabi |
| |
|
Predictive chemical kinetic model development
| iSAF equipment
| Computational
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Model refinement using quantum chemical computations
| iSAF equipment
| Computational
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Chemical kinetic Model generation using the Reaction Mechanism Generator software
| iSAF equipment
| Computational
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Confocal Zeiss LSM 700
| Lasers: 405, 488, 555, 633 nm Inverted microscope
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Confocal Zeiss LSM 700
| Inverted confocal, Lasers: 405, 488, 555, 639 nm
| Confocal Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Confocal Zeiss LSM 710
| Inverted confocal, Lasers: 405, 454, 488, 514, 543, 639nm. GaAsP detectors. Full incubation for live imaging
| Confocal Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Confocal Zeiss LSM 880
| Lasers: 405, 458, 488, 514, 561, 633 nm upright microscope Airyscan super resolution detector, Fast mode, GaAsP- spectral detector
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Confocal Zeiss LSM 880 multi photon
| Lasers: 458, 477, 488, 514, 561, 633 nm and multi-photon tunable laser 690-1040 nm and Spectral imaging
| Confocal Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Confocal Zeiss LSM 900 Inverted
| Lasers: 405 488 561 640 nm inverted microscope, Airyscan2 super resolution detector, MLPX 2 and 4; 2 GaAsP detectors
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Confocal Zeiss LSM 900 Upright
| Lasers: 405 488 561 640 nm upright microscope, Airyscan2 super resolution detector, MLPX 2 and 4; 2 GaAsP detectors
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Confocal Zeiss LSM 980 AiryScan
| Lasers: 405, 454, 488, 514, 543, 639nm. Spectral detector, AiryScan, uper-resolution. Full incubation for live imaging
| Confocal Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Microscope system Axioskop 40, ZEIS
| | Confocal Microscope
| Grand Water Research Institute (GWRI)
| Ilana Barzilay |
| | |
Spinning Disk Confocal Olympus IXplore-Spin
| Lasers: 405 488 561 640 nm, Prime BSI Express monochrome camera
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Contact Angle Goniometer
| Contact Angle Goniometer
| Contact angle measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Salt Spray Cabinet
| 450L, prohesion option
| Corrosion testing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
Leica ICE high pressure freezing system
| Cryo-SEM specimen vetrification
| Cryo-SEM specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Olga Kleinerman |
| |
|
Leica GP2
| Cryo-TEM specimen preparation under controlled conditions
| Cryo-TEM specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Zipora Lansky |
| |
|
Leica CM1850 Cryostat
| Frozen sectioning
| Cryostat
| Biomedical Core Facility (BCF)
| Katren Sakran |
| |
|
