Stirred falling film evaporator
| 30 l/hr
| Food Technology - Evaporation
| Carasso FoodTech Innovation Center
| Yair Glick |
|  |
|
Stereo microscope, Zeiss Discovery V20
| motorized 20X zoom, digital camera and optic polarization
| Microscopy
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Stephan mixer
| 15L
| Food Technology - Mixing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Steam food Autoclave
| Measured Inner Package tmp via Process
| Food Technology - Sterilization
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Sputter Deposition (AJA International Inc. ATC 2200)
| Different coating by metals, alloys, oxide, nitrides
| Sputtering by argon plasma
| RBNI Sputtering Lab
| Andrey Wolf |
| |
|
Spray dryer
| Used to dry liquids to powder by means of an atomizer.
| Powders granulation
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Spray Dryer
| Drying liquids into powder. 1~2 Kg/hr
| Food Technology - Drying
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Spinning Disk Confocal Olympus IXplore-Spin
| Lasers: 405 488 561 640 nm, Prime BSI Express monochrome camera
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Spherical array probe
| Spherical array probe for volumetric real-time optoacoustic imaging at several mm-depths
| optoacoustic imaging system
| National Center for Imaging and Brain Stimulation
| Inbar Brosh |
| | |
SPF, NON SPF, Quarantine, Biohazard
| SPF, NON SPF, Quarantine
| Animals in research infrastructure
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Spectrophotometer Cary 7000 UMS and UMA
| Measurement of Transparency, Absorbance and Reflectance
| Optical measurment
| RBNI Sputtering Lab
| Andrey Wolf |
| |
|
Sonicator
| Microtip for 0.25 - 10ml, cup horn for sterile work, up to 8 x 1.5ml tubes
| Ultrasonic Processor
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Solid Oxide Fuel Cells test station (X-20, Greenlight)
| The Greenlight X20 SOFC test station is a testing platform that is equipped with a button cell fixture for testing coin cell samples of 25mm diameter. The maximum temperature of tests is 1000 °C. The power range of the test station is up to 100W.
| Solid Oxide Fuel Cells test station
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Solar Simulator (Abet, USA)
| The Solar Simulator is a light source for testing photoelectrodes and photocatalysts under standard illumination conditions.
| Solar Simulator
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Software: FlowJo
| Flow cytometry data analysis software
| Flow cytometry Data analysis software
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Software: FCS Express / FlowJo
| Flow Cytometry analysis
| Flow cytometry Data analysis software
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
Software: FCS Express
| Flow cytometry data analysis software
| Flow cytometry Data analysis software
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Software: Cytobank
| Cloud-based platform for the analysis, storage, and sharing of flow and mass cytometry data
| Flow cytometry Data analysis software
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Slide Scanner Olympus Slideview VS200
| 150 slide capacity, brightfield, polarized light and fluorescence scanning
| Slide Scanner
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
SLA (3D printer)
| SLA polymer 3D printer
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
SILAC or dimethylated proteome analysis-HFX/Exploris 480 MS
| SILAC or dimethylated proteome analysis
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Siemens Prisma Magnetom
| 3 Tesla MRI for human, including High resolution anatomical scanning, Standard clinical sequences, fMRI, Susceptibility weighted imaging, Dinamic cardiac imaging, Spectroscopy, MR angiography, Diffusion, Perfusion
| MRI
| May Blum Dahl Technion Human MRI Research Center (TecH MRC)
| Daphna Link-Sourani |
| |
|
Shimadzu (UV-1800) Spectrophotometer
| Shimadzu (UV-1800) Spectrophotometer
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
Sensory Evaluation Lab
| Designed per ISO 8589 standards
| Food Technology - Food
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
SEM - FEI E-SEM Quanta 200
| EDS. WDS
| Scanning electron microscopy
| EMC - The Electron Microscopy Center
| Maria Koifman |
| |
|
SEM - FEI E-SEM Prisma
| EDS. WDS, Low-vacuum
| Scanning electron microscopy
| EMC - The Electron Microscopy Center
| Maria Koifman |
| |
|
Seehorse
| Real-time measurement of cellular metabolism in live cells
| Metabolomics
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Secretome analysis- Q Exactive HFX/Exploris 480 MS
| Identification and quantification of proteins from conditioned medium
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Seahorse XFe96 Metabolic Flux Analyzer
| Real-time measurement of cellular metabolism in live cells
| Metabolomics
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Screen printer (MSP-485, HIM)
| Screen printing is a printing technique whereby a mesh is used to transfer ink onto a substrate, except in areas made impermeable to the ink by a blocking stencil. Mesh/stencil is uniq for each work, so every user is requered to prepare his/her own mesh(s) and stencil(s). The maximum printing area is 8 x 8 inch.
| Screen printer
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Satelite Ground Station
| S-band, VHF/UHF antennas
| Space
| Asher Space Research Institute
| Lee Nudel |
| |
|
Sandblasting machine
| Removing rust, paint, corrosion from materials.
| Blasting
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Sample Preparation for Biomedical electron microscopy services
| Sample preparation and acquisition for scanning and transmission electron microscopy
| Biological electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Salt Spray Cabinet
| 450L, prohesion option
| Corrosion testing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
Safematic Coating system
| Carbon or Iridium coating system for SEM and TEM specimens
| Electron microscopy specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Olga Kleinerman |
| |
|
Rotating Ring Disk Electrode (RRDE) -3A Apparatus,
| RRDE-3A is a constant rotation system for use in hydrodynamic modulation rotating ring disk electrochemistry. It could be operated also as RDE. Rotation speed range is 100-8000 rpm. Electrodes are compact and rapidly interchangeable. The unit provides an adjustable valve system for inert gas purging inside the cell vial.The system is connected to VSP potentiostat (BioLogic), allowing performance of electrochemical measurements.
| Rotating Ring Disk Electrode (RRDE)
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Rock Maker software, Formulatrix
| Crystallization screening design, optimization, image viewing and crystal detection
| Protein Crystallography
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Rock Imager 1000, Formulatrix
| Fully automated crystal plate imaging on a user-defined schedule
| Protein Crystallography
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Rigaku XtaLAB Synergy-S
| The Cypher ES Environmental AFM provides an exceptional performance in resolution, speed and stability in standard contact and tapping modes. It is compatible with a complete range of modes and accessories. In addition, it enables studying samples in controlled gas or liquid environments, doing electrochemical experiments and measuring conductivity of samples.
| X-ray diffraction
| Chemical and Surface Analysis Lab
| Natalia Fridman |
| |
|
Rigaku SmartLab 9kW
| Cu radiation source - X-ray diffraction for powders, thin films or bulk. In-situ heating and cooling, in-plane, rocking curve, pole figure, reflectivity, SAXS, GI-WAXS.
| X-ray diffraction
| X-Ray Diffraction Laboratory, Materials Science and Engineering
| Yael Etinger Geller |
| |
|
Rigaku SmartLab 3kw
| Identification of molecules arrangement within the crystal structure.
| Microstructure Analyzer - X-ray diffractometer (XRD)
| The Russell Berrie Nanoparticles and Nanometric System Characterization Center
| Maya Davidovich-Pinhas |
| |
|
Rigaku miniflex 600 diffractometer
| Cu radiation
| Powder diffraction XRD
| Quantum Matter Research (QMR) center
| Anna Eyal | | |
|
Rigaku diffractometer
| Determination of the crystal structures of the small organic molecules
| X-ray lab
| Chemical and Surface Analysis Lab
| Natalia Fridman |
| |
|
Real-time qPCR system
| | Real-time PCR
| Grand Water Research Institute (GWRI)
| Ilana Barzilay |
| | |
Real-Time ATP Rate Assay
| Quantification of the rate ATP production from glycolysis and mitochondria simultaneously using label-free technology in live cells
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Reactive Ion Etching (RIE Plasma Therm 790)
| Plasma dry etch
| Plasma dry
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Rapid Thermal Annealing (JetFirst 200HT)
| | Thermal annealing
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Qubit
| DNA/RNA quantification
| Fluorimeter for DNA/RNA quantification
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Quantum Design MPMS3
| 7T magnet, 0.4K-1000K temperature range
| SQUID Magnetometer
| Quantum Matter Research (QMR) center
| Anna Eyal | | |
|
Quantum Design Dynacool 14T
| 14T magnet, 50mK- 400K temperature range, Heat capacity, thermal conductance and electrical resistivity measurement options
| Physical property measurement system
| Quantum Matter Research (QMR) center
| Anna Eyal | | |
|
QuantStudio3
| Real-time PCR
| Real-time PCR
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
QuantStudio1
| Real-time PCR
| Real-time PCR
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
QIAcuity Digital PCR
| Digital real-time PCR
| Digital qPCR
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Qiacube Connect (Qiagen)
| DNA/RNA extraction
| DNA/RNA Extraction
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Q150T ES
| Combined system for sputter coating or carbon/metal evaporation
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Q-TOF LCMS Waters
| ESI
| Chromatography, Mass Spectrometry
| Chemical and Surface Analysis Lab
| Larisa Panz |
| |
|
Q-TOF LCMS Bruker
| ESI APCI Solid prob APPI
| Chromatography, Mass Spectrometry
| Chemical and Surface Analysis Lab
| Larisa Panz |
| |
|
Pyrolyse retort
| Debinding system (phenolic binder)
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Pulsed Electric Field (PEF)
| 24KV 20µs 300Hz
| Food Technology - Cell Perforation
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
PTM analysis- Q Exactive HFX MS
| Identification and quantification of post translation modifications
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Protein structure determination software
| Protein structure determination software, molecular building and structure analysis
| iMac workstations with software
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Protein profile from plasma samples -SEER platform and Exploris 480 MS
| Identification and quantification of enriched proteins from plasma
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Protein identification- Q Exactive plus MS
| Identification of proteins from a gel band or simple mixture
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Protein Crystallography Data Collection (ESRF)
| Protein crystals data collection at the European Synchrotron Radiation Facility (ESRF)
| Protein Crystallography
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Profilometer (DekTak Bruker)
| A stylus (contact) profilometer that is used to measure height differences (steps) on samples, and serves as a characterization tool for measuring thin film thickness and surface roughness.
| Profilometer
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Printhead, 80pL
| Binder jetting 3D printer prithead (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Press Beckwood 200 Tons
| 200-ton hydraulic press
| Pressing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Preclinical Surgery rooms
| Surgery rooms
| Surgery rooms
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
PPS AFX3150 Power Source
| AC+DC, up to 800V, 100A, asymetrical waveforms
| | IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
Powder recycler
| Powder sieving machine (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Powder Mixer
| Powder mixing machine, 30 kg mixing volume.
| Powders blending
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Powder distribution system
| M-Flex 2-power distribution system
| Mechanical distributing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Polyamines identification and relative quantification (Orbitrap Exploris 240/Q Exactive)
| Identification and relative quantification of Polyamines and acetylated foem in dicers sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Polar metabolomics profiling (Orbitrap Exploris 240/Q Exactive)
| Polar metabolites profiling with a in-house library of 550 metabolites - identification and relative quantification in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Polak family distance learning studio
| | Video productions
| The Center for Promotion of Learning and Teaching
| Olga Chuntonov | | |
|
Plate Heat Exchanger
| Up to 6 lit/min, 100 °C
| Food Technology - Pasteur
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Plasma-Assisted Atomic Layer Deposition
| Ultratech/ Cambridge Nanotech Fiji G2
| Film deposition
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Plasma Asher (YES G-1000)
| Plasma clean
| Plasma clean
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Plasma Asher (Axic HF-8)
| Plasma clean
| Plasma clean
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Planetary mono mill (PULVERISETTE 6, Fritsch)
| Planetary Mill is used for fine grinding of hard, medium-hard, soft, brittle, tough and moist materials. The maximum rotational speed of the mill in FC lab is 650 rpm. The minimum volume of a grinded sample is 10 ml. Two grinding bowls, 80 ml and 250 ml volume, and grinding balls of 5mm and 10mm diameter, all made of Zirconium Oxide are available.
| Planetary mono mill
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Phosphoproteome- Exploris 480 MS
| Phosphoproteome-Identification and quantification of enriched phosphopeptides from whole lysates.
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
PFIB - Helios 5 PFIB Cxe
| HRSEM, EDS, TEM lamella preparation (large cross sections), nano-patterning
| Plasman Focused Ion Beam
| EMC - The Electron Microscopy Center
| Galit Atiya |
| |
|
Perkin Elmer Tri-Carb 4810 TR
| Gamma, beta and alpha radiation for radioactivity quantification
| Radioactivity Scintillation Counter
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Pentax EPK-1 Gastroscope and Colonoscope
| Gastroscope and Colonoscope
| Gastroscope and Colonoscope
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
PEM Fuel Cells test stations (850e, Scribner)
| The 850e system is a complete test station for operation and measurement of PEM/DMFC fuel cells. 4 test stations are available in the laboratory. The system can be operated in 5/25/50 A current ranges, maximum load power is 100W. The available cell fixtures are suitable for testing cells with active aresa of 5cm2 and 25 cm2. Three test stations are equipped with a humidifyer bypass for wet/dry testing and with a multygas system for switching between various gases during one test. Two are equiped with automatic back pressure unit.
| PEM Fuel Cells test station
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
PEM and AEM Water Electrolyzers
| Comprehensive testing of membrane and catalyst integration under controlled conditions to evaluate performance metrics such as current density, efficiency, and durability.
Hardware size: up to 5 cm2.
| Water Electrolyzers
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| | |
Particle Size and Shape Analyzer Camsizer
| Powder size measurements, range from 0.8 mm to 8 mm.
| Optical system with high resolution
| IMT- Israel Institute of Materials Manufacturing Technologies
| Leonid Chernobylskiy |
| |
|
Palmitate Oxidation Stress Test
| Intrinsic rate and capacity of a cell to oxidize palmitate in the absence or limitation of other exogenous substrates.
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Optris PI-08M
| Compact infrared camera for laser applications. Spectral range 780 – 820 nm. Temperature range 575 °C ... 1900 °C
| Thermal analysis
| IMT- Israel Institute of Materials Manufacturing Technologies
| Aleksey Kovalevsky |
| |
|
Optical Microscope Nikon
| Optical Microscope
| Optical Microscopy
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
OPA6 14kW Laser
| High power 14Kw fiber CW laser (Civan). 1064 nm wavelength, dinamic beam shape feature
| Welding, Cutting, Surface Hardening, Energy process simulations,
| IMT- Israel Institute of Materials Manufacturing Technologies
| Aleksey Kovalevsky |
| |
|
Olympus SZX16 Fluorescent Binocular
| 2 Objectives: X0.8 and X1.6
| Fluorescence Binocular
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Olympus MVX10M
| Macro zoom microscope. Brightfield and fluorescent specimens
| Macro microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Olympus BX51 Light Microscope
| light microscopewith a CCD camera
| Light Microscope
| EMC - The Electron Microscopy Center
| Yaron Kauffmann |
| |
|
Odyssey M
| 488, 520, 685, 785 nm, Epi-illumination and Trans-illumination
| Infrared Imaging scanner
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Octet R8
| Fluidics-free approach to biomolecule kinetic screening and affinity characterization
| Bio-Layer Interferometry (BLI)
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
NYX Cluster
| | HPC (High Performance Computing)
| NYX Cluster
| David Cohen |
| | |
Nikon, LV150
| Up to X1000, brightfield, darkfield, contrast.
| Optical microscope
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Nikon Spinning Disk Confocal
| Inverted confocal. CSU-W with Dual sCMOS camera photometrics BSI , Lasers: 405; 488; 561; 640, Objectives 100x silicon (NA 1.35) and 100x oil (NA 1.45). Full incubation for live imaging
| Spinning Disc Confocal Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Nicolet iS50 FTIR Spectrometer (Thermo Scientific)
| The Nicolet iS50 FTIR is equipped with VeeMAX III specular reflection accessory with ATR (PIKE Technologies), offering continuous variable angle of incidence and a variety of crystal plates to selectively control the depth of penetration of the IR beam into the sample. ATR applications include the study of layered samples, coatings, release agents, monolayers on silicon and chemical migration studies.
| FTIR
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
