Dilatometer (DIL 402 Expedis Select, Netzsch)
| Dilatometry is the method of choice for highly precise measurement of dimension changes to solids at a programmed temperature change and with negligible sample strain. The dilatometer in the FC lab is equipped with a dual pushrods system that enables doing measurements in a dual or a differential mode. The maximum sample temperature is 1150°C, the range of heating rates is 0.001-50 K/min. Measurements could be done in vaccuum, nitrogen or argon atmospheres. Samples of diameters 4,6 and 8 mm and lengths up to 52 mm could be tested. Several reference samples made of Aluminium Oxide are avalable.
| Dilatometer
| GTEP Fuel Cells Lab
| Irena Levin |
|  |
|
DMA Analyzer
| MCR 702e Multi Drive (Anton Paar) is instrument for the dynamic mechanical analysis of solid, soft, and liquid samples. Perform dynamic mechanical analysis in bending, tension, compression, and torsion, standard and highly sophisticated rheological measurements as well as thermomechanical analysis (TMA) with one instrument.
| DMA analyzer
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Double jacket mixing steam pot
| 15L
| Food Technology - Mixing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Dr. Natalie Shaffer distance learning studio
| | Video productions
| The Center for Promotion of Learning and Teaching
| Olga Chuntonov | | |
|
Drilling machine
| Used to cut holes in a workpiece
| Drilling
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Drum Dryer Vaccum
| 4 l/hr
| Food Technology - Drying
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Dry extruder (TVP) + coextrusion
| | Food Technology - Shape Processing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Dry Film Laminator (JSE JSL-1200)
| Photolithography film laminator
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Dry/ Wet Electrochemical Characterization Station
| Ivium nStat is a multi-channel Potentiostat/Galvanostat with an integrated impedance analyzer. The nStat has four potentiostats, each potentiostat is a completely independent instrument. The instrument is designed for a wide range of applications, such as battery/fuel cell-testing, electrode development, biotechnology and other Electrochemical Research applications.
| Potentiostat/galvanostat
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
DSC
| DSC is used to measure heat flow for material characterization by providing thermal properties such as melting point, glass transition and crystallization.
| Analyzers
| Polymer Engineering Teaching Lab, Chemical Engineering
| Luba Texler | | | |
Dual beam Ga+ Helios G3 FIB+SEM
| Ga+ FIB, HRSEM, EDS, EBSD. Material cross- srectioning, TEM lamella preparation, failure analysis, nano-patterning, high resolution imaging.
| HRSEM and (Ga+) FIB
| RBNI FIB Lab
| Larisa Popilevsky |
| | |
E-beam Evaporator (Airco Temescal BJD 1800)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (Airco Temescal FC 1800)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (Evatec BAK-501A)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (VST TFDS-184)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-Beam Lithography (Raith EBPG 5200)
| | Nano e-beam lithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
ECM analysis- Q Exactive HFX/Exploris 480 MS
| Identification and quantification of proteins from extracellular matix
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Electro heating – Ohmic heater
| | Food Technology - Sterilization
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Ellipsometer Multi-layer measurements
| Wave length 193-2500nm
| Film thickness and refractive index measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Ellipsometer Multi-layer measurements
| Optical thickness meeasurment by polarised light, wave length 193-2500nm (Woollam VASE)
| Optical measurment
| RBNI Sputtering Lab
| Andrey Wolf |
| |
|
Ellipsometere J.A. Woollam, M-2000UI
| Optical thickness meeasurment by polarised light
| Optical measurment
| RBNI Sputtering Lab
| Andrey Wolf |
| |
|
EM AFS2
| Freeze Substitution and Low Temperature Embedding System
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
EmulsiFlex C3
| High-Pressure Homogenizer
| High-Pressure Homogenizer
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Envision TEC GmbH 3D- Bioplotter Manufacturer
| Multi channel bioprinting of cells and biomaterials
| 3D Bioprinting
| 3D Bioprinting Center for printing Cells and Biomaterials
| Galia Ben-David |
| |
|
Eppendorf Centrifuge 5804
| iSAF – Max. capacity: 4 × 250 mL/2 × 5 MTP, Swing-bucket rotors and adapters accommodate tubes and bottles from 0.2 mL to 250 mL. Plate rotor for centrifugation of all types of MTP, PCR, cell culture, or Deepwell Plates
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
EQX-850 LDLS – High Brightness, Laser-Driven Light Source
| iSAF – Wavelength Range: 170 nm – 2500 nm Plasma Size (FWHM): With Retro: 140 μm X 290 μm Dual Output: 120 μm X 280 μm Numerical Aperture: 0.58 NA Bulb Lifetime: 10,000 hours Distance of Plasma from Output Window 13.7 mm La…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Evosep Eno
| Chromatographic system for high performance and standardized proteomics
| Chromatography
| Smoler Proteomics Center
| Tamar Ziv |
| |
|
EXCITECH CNC ROUTER 5 axis
| Large volume CNC routing machine soft materials
| CNC Routing
| Architecture recources center - Design-tech
| Cris Nannig | | |
|
EXCITECH SHMS1325C CNC ROUTER
| 1.22m * 2.44m work envelope CNC routing machine soft materials
| CNC Routing
| Architecture recources center - TCOM Digital Lab
| Yair Rahabi |
| |
|
Exosomes analysis- Q Exactive HFX
| Identification and quantification of proteins from purified exosomes
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Ez-50 LLOYD Universal Material Testing Machine
| Mechanical properties measurement (tension, compression)
| Mechanical Properties - Twin column design with acrosshead travel
| The Russell Berrie Nanoparticles and Nanometric System Characterization Center
| Sigal Eichler |
| |
|
FACSDiscover S8
| Full spectrum and image-based cell sorter, lasers: 349, 405, 488, 561 and 637 nm
| FACS Sorter
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
FACSymphony A5 SE with HTS
| Spectral-enabled cell analyzer. Lasers: 349, 405, 488, 561, 637nm. HTS system
| FACS Analyzer
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Fatty acids (free and total pool) identification and relative quantification (Orbitrap Exploris 240/Q Exactive)
| Identification and relative quantification of 90 fatty acids (free and total pool) in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
FEI Tecnai G2, Cryo-TEM and TEM
| Cryo-TEM, TEM
| Electron microscopy
| Technion Center for Electron Microscopy of Soft Matter
| Olga Kleinerman |
| |
|
Film Processor
| X-ray film processor - For radioactive and ECL membranes
| Film developing processor
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Film stress measurement (Tencor FLX-2320)
| | Film stress measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Food high moisture extruder
| 1 kg/hr. Dual screw
| Food Technology - Shape Processing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Formulator, Formulatrix
| Flexible liquid dispensing for optimizing protein crystallization conditions
| Protein Crystallography
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Foseco rotary degassing machine
| Rotary degassing of aluminium alloys
| Mechanical distributing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Freestanding transfer station for 2D materials
| | 2D materials transfer
| 2D Materials
| Assael cohen |
| |
|
Freeze Driers
| Drying liquids into powder. up to 3 Kg batch
| Food Technology - Drying
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
FTIR
| | FTIR
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
FTIR
| Nicolet iS-50, Thermo, (ATR, FT-IR) 500- 4000cm-1
| FTIR
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Furnace Nabertherm HT 40/16
| High temperature furnace with fibre insulation, max. temp. 1600 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Furnace Nabertherm HT 40/18
| High temperature furnace with fibre insulation, max. temp. 1800 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Furnace Nabertherm N250/85 HA
| Air circulation chamber furnace, max. temp. 850 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Furnace Nabertherm T10/11
| Electrically heated furnace for melting and holding, max. temp. 1100 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Fusion FX7 Edge Spectra
| Chemiluminescence, UV, IR and RGB epi-illumination for fluorescence and white epi- and transillumination detection
| Gel Documentation System
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
FutureTech, FM-110
| Automatic meaurement, Knoop, from 10gf up to 1000gf load
| Micro-Vickers Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
FutureTech, FV-110
| Automatic meaurement, from 1kgf up to 100kgf load
| Vickers Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Gamry Reference 3000 Potentiostat / Galvanostat
| low currents, high voltage
| Electrochemical research/corrosion tesing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
Gas-Chromatograph (GC) – Agilent 7890A
| It is used to analyze and identify volatile substances in the gas or liquid phase. The GC is equipped with TCD and FID detectors as well as CTC auto sampler unit and a controlled valve system for continuous sampling. Development of techniques to evaluate H2 and O2 in complicated system is also possible.
| GC Chromatography
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
GC with TCD and FID detectors
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
GC-MS
| | Chromatography Mass Spectrometry
| Chemical and Surface Analysis Lab
| Larisa Panz |
| |
|
GC-MS
| Connected to PAL sample injector that enables liquid, headspace and SPME injections with the same autosampler
| Chromatography; Mass Spectrometry
| The Center for Research in Environmental Engineering,
Analytical Laboratory for Micro-Pollutants
| Irena Kuzmenkov |
| | |
GE OEC 9900 elite Fluoroscope
| Fluoroscope
| Fluoroscope
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
GE Vivid E9 4d US
| US
| US
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
GE Vivid S70N US, Cardiac, ICE, TEE
| US, Cardiac, ICE, TEE
| US, Cardiac, ICE, TEE
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
GE Vivid Vivid IQ US, Cardiac, ICE.
| US, Cardiac, ICE.
| US, Cardiac, ICE.
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Genetic Analyzer 3500XL
| Sanger seqeuncing, human cell line authentication
| Sanger and genotyping
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Glove Box (VTI)
| The glove box provides a high quality controlled environment, designed for handling materials sensitive to oxygen and water. The attainable purity of this system is H2O < 1ppm, O2 < 1ppm. The workstation is equipped with large and small antechambers and a user-friendly PLC controller.
| Glove Box
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Glycolysis Stress Test
| Measures the capacity of the glycolytic pathway after glucose starvation.
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
GPS simulators
| Simulating GPS RF Signals
| Engineering
| Asher Space Research Institute
| Lee Nudel |
| |
|
Greenlight G20 fuel cell testing station
| iSAF – Available with Greenlight's integrated 'Intelligent Fuel Cell Diagnostics' capabilities: FCDX, G20 power range: up to 100 Watts, Manual and automated operation, Emerald control software, Automated scripting capab…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
High Pressure Homogenizer
| 1500 bar. 0.25 lit/min
| Food Technology - Size Reduction
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
High-pressure/high-temperature reactor
| iSAF equipment
| Reactors
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
High-speed imaging
| iSAF – Four mid-IR units (4 – 6 μm) o H2O, CO2, NO, CH2O detections, < 50 mW power, < 10,000 Hz scan rate
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
High-speed IR imaging
| iSAF – Telops FAST M3k o Spectral range: 1.5 – 5.4 μm. Resolution: 320 x 256 pixels. Frame rate: 3,100 fps (full res) – 100,000 fps (64 x 4 pixels). Exposure time: 1 μs – full frame
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Histology Services Laboratory
| Tissue processing, paraffin and frozen sectioning, staining
| Histology Services Laboratory
| Biomedical Core Facility (BCF)
| Katren Sakran |
| |
|
Horiba Jobin Yvon (LabRAM HR Evolution) Micro-Raman
| Horiba Jobin Yvon (LabRAM HR Evolution) Micro-Raman
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
HPP
| Up to 8000 bar
| Food Technology - High pressure processing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
HR-SEM (Hitachi S-4800)
| | Scanning electron microscopy
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
HR-SEM (Tescan Clara)
| Low currents, Decel mode
| Scanning electron microscopy
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
HRTEM - FEI Titan Cubed Themis G2 60-300
| Double corrected, Monochromated, EDS, EELS, In-situ holders, 4D-STEM
| Transmission electron microscopy
| EMC - The Electron Microscopy Center
| Yaron Kauffmann |
| |
|
HVOF coating machine
| Thermal spray system
| HVOF technology
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Hyperspectral Infrared Imaging
| iSAF – Currently being upgraded, Telops Hyper-Cam MWE FAST, Spectral range: 1.5 – 5.4 μm, Spectral resolution: 0.25 – 150 cm-1, Spatial resolution: 320 x 256 pixels, Frame rate: 0.032 – 32 cubes/s, Exposure time: 1 μ…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
ICP Deep RIE (Plasma-Therm Versaline
| Plasma dry etch for deep Si etch, (Fluorine Chemistry)
| Plasma dry
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Identification of contaminating proteins- Q Exactive plus
| Analysis of contaminating proteins in the production of recombinant protein
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
IDEXX Catalist One
| Blood Biochmestry
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
IDEXX Coag Dx
| Blood Coagulation
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
IDEXX ProCyte Dx
| Complite Blood Count
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
IDEXX Vetlab UA
| Urinary Analyzer
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
IDEXX Vetstat
| Electrolyte and Blood Gas Analyzer
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Image Analysis
| Support for performing complex analyzes and deep learning. Imaris, Image pro premier, ImageJ, Matlab, and Python.
| Image Analysis
| Biomedical Core Facility (BCF)
| Eilam Golan Zagagy |
| |
|
ImageStream
| Imaging Flow Cytometer. Lasers: 405, 488, 561, 642 nm. HTS system.
| Imaging FACS Analyzer
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
Imaris - Image analysis software
| Image analysis software for analysis of 3D/4D/5D images
| Software for Image Processing
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
In vivo / In vitro Stable isotope tracing for tracking specific pathways (Orbitrap Exploris 240)
| In vitro or in vivo stable isotope tracing for tracking specific metabolic pathways. All tracers are supported (e.g., 13C6-Glucose, 13C5-Glutamine, etc.)
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Incucyte SX5
| High throughput, continuous live cell imager transmitted and fluorescence
| Live-Cell Analysis System
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Inductively Coupled Plasma (ICP)
| ICP-OES is an analytical technique that can be used to measure elements in a sample
| ICP-OES
| The Center for Research in Environmental Engineering
| Naama Manor Korin |
| | |
Infinite 200 PRO
| Fluorescence, luminescence, absorbance
| Plate reader
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Infinity Abberior STED Confocal microscop
| Stimulated Emission Depletion (STED) 3D STED and FLIM
| Super Resolution 3D STED
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Instron 1342 (Hydraulic )
| 10kN, 20Hz, +\- 60 mm
| Tensile machine
| The Materials Mechanics Center
| Ziv keren | | |
|
Instron 3369
| Up to 50 kN, tensile / bending / compression [+environmental chamber (from -100 to 300 deg.C)]
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron 4400R
| Up to 250 kN, tensile / bending / compression
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron 4483 (Screw Driven )
| 150kN, +\- 2m
| Tensile machine
| The Materials Mechanics Center
| Ziv keren | | |
|
Instron 8801
| Up to 100 kN, tensile / bending / compression / fatigue/ K1c
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron 8802
| Up to 250 kN, tensile / bending / compression / fatigue / K1c
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron E10K (electric)
| linear: 10kN,100Hz, +\- 30mm; Torsion: 100Nm,100Hz, +\- 135o rotation
| Tensile machine
| The Materials Mechanics Center
| Ziv keren | | |
|
Instron Electropuls E3000
| Up to 1kN/3 kN,
tensile / bending / compression / fatigue
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
