Bruker SkyScan 1276 MicroCT
| High speed, high resolution ex-vivo and in-vivo micro-CT scanner. Spatial resolution down to 2.8µm ex-vivo and 10µm in-vivo
| CT
| Biomedical Core Facility (BCF)
| Galit Saar |
|  |
|
ATM Brlilliant 240 Saw
| Abrasive cut-off machine for workpieces up to 95 mm. dia.
| Cutting
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Bandsaw Blade machine
| Cut-off machine for workpieces up to 190 mm. dia.
| Cutting
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
CVD for growth Graphene
| CVD for growth Graphene, hBN and TMDC, Transfer station , Furnce annealing, and Raman spectroscopy
| CVD
| 2D Materials
| Assael cohen |
| |
|
DCS 3+
| DSC 3+ system (from -150oC up to 500oC), Mettler Toledo
| DCS 3+
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Dicer (Disco DAD3350)
| | Dicing
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Nano DSF, Prometheus, Nanotemper
| Label-free protein stability analysis by monitoring intrinsic fluorescence (tryptophan and tyrosine) changes by temperature gradient, with additional aggregation detection via back reflection technology.
| Differential Scanning Florimetry
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
QIAcuity Digital PCR
| Digital real-time PCR
| Digital qPCR
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Dilatometer (DIL 402 Expedis Select, Netzsch)
| Dilatometry is the method of choice for highly precise measurement of dimension changes to solids at a programmed temperature change and with negligible sample strain. The dilatometer in the FC lab is equipped with a dual pushrods system that enables doing measurements in a dual or a differential mode. The maximum sample temperature is 1150°C, the range of heating rates is 0.001-50 K/min. Measurements could be done in vaccuum, nitrogen or argon atmospheres. Samples of diameters 4,6 and 8 mm and lengths up to 52 mm could be tested. Several reference samples made of Aluminium Oxide are avalable.
| Dilatometer
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
CDs Optical Measurements
| CDs Optical Measurements (Vickers micro-system)
| Dimension measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
DMA Analyzer
| MCR 702e Multi Drive (Anton Paar) is instrument for the dynamic mechanical analysis of solid, soft, and liquid samples. Perform dynamic mechanical analysis in bending, tension, compression, and torsion, standard and highly sophisticated rheological measurements as well as thermomechanical analysis (TMA) with one instrument.
| DMA analyzer
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Qiacube Connect (Qiagen)
| DNA/RNA extraction
| DNA/RNA Extraction
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Tapestation 4200 and 2200 (Agilent)
| DNA/RNA quality
| DNA/RNA QC
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Drilling machine
| Used to cut holes in a workpiece
| Drilling
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Large scale Drone scans
| DJI Mavic pro2
| Drone flight
| Architecture recources center - Media Lab
| Haim Zinger | | |
|
Tube Furnaces for Dry Oxidation
| Tube Furnaces for Dry Oxidation (BTI-Bruce RTRI-878)
| Dry oxidation
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Combined EEG-fMRI
| Simultaneous EEG-fMRI for human
| EEG-fMRI
| May Blum Dahl Technion Human MRI Research Center (TecH MRC)
| Daphna Link-Sourani |
| |
|
Gamry Reference 3000 Potentiostat / Galvanostat
| low currents, high voltage
| Electrochemical research/corrosion tesing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
Versastat 3 Potentiostat / Galvanostat
| low currents
| Electrochemical research/corrosion tesing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
3D Metal printing Arcam A2X
| High-temperature capability, 200x200x380mm , metal alloy support.
| Electron Beam Melting (EBM)
| IMT- Israel Institute of Materials Manufacturing Technologies
| Leonid Chernobylskiy |
| |
|
EM AFS2
| Freeze Substitution and Low Temperature Embedding System
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
FEI Tecnai G2, Cryo-TEM and TEM
| Cryo-TEM, TEM
| Electron microscopy
| Technion Center for Electron Microscopy of Soft Matter
| Olga Kleinerman |
| |
|
K850 Critical Point Dryer
| Critical Point Dryer
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Q150T ES
| Combined system for sputter coating or carbon/metal evaporation
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
TEM - FEI Talos L120C
| Transmission electron microscope
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Ultramicrotome Leica EM UC7
| Thin Sections at Room and Cryo Temperatures
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Controlled environment vitrification system (CEVS)
| Cryo-TEM specimen preparation under controlled conditions
| Electron microscopy specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Ellina Kesselman |
| |
|
Leica ACE Freeze fracture system
| Freeze-fracture-replication and cryo-SEM specimen preparation. Possible platinum and chromium coating.
| Electron microscopy specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Olga Kleinerman |
| |
|
Leica UC7 Ultramicrotome
| Thin sections preparation for TEM, surface polishing of SEM samples.
| Electron microscopy specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Ellina Kesselman |
| |
|
Safematic Coating system
| Carbon or Iridium coating system for SEM and TEM specimens
| Electron microscopy specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Olga Kleinerman |
| |
|
GPS simulators
| Simulating GPS RF Signals
| Engineering
| Asher Space Research Institute
| Lee Nudel |
| |
|
Clean room
| Clean room 100,000
| Equipment Assembly
| Asher Space Research Institute
| Lee Nudel |
| |
|
Thermal Cycling Oven
| 150C to -80C
| Equipment testing
| Asher Space Research Institute
| Lee Nudel |
| |
|
E-beam Evaporator (Airco Temescal BJD 1800)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (Airco Temescal FC 1800)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (Evatec BAK-501A)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (VST TFDS-184)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Thermal Evaporator (Vinci PVD-4)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Technion Statistics Laboratory
| Biostatistics, Regression, Machine Learning, Mixed Models, Factor Analysis, Structural Equation Models
| Experimental design and analysis
| Technion Statistics Laboratory
| Tatiana Umansky |
| |
|
Alox Oxidation Furnace
| Low temp wet oxidation
| Fab
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
BD FACS Calibur
| Lasers: 488, 635 nm
| FACS Analyzer
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
CytoFLEX LX, 5 lasers, HTS
| Lasers: 375, 405, 488, 561, 635 nm. HTS system, High sensitivity, High resolution.
| FACS Analyzer
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
FACSymphony A5 SE with HTS
| Spectral-enabled cell analyzer. Lasers: 349, 405, 488, 561, 637nm. HTS system
| FACS Analyzer
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
LSR II
| Lasers: 355, 405, 488, 635 nm. HTS system
| FACS Analyzer
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
LSR SORP, 5 lasers, HTS
| Lasers: 405, 488, 561, 635 nm. HTS system
| FACS Analyzer
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
LSR-Fortessa
| Lasers: 355, 405, 488, 640 nm
| FACS Analyzer
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
LSR-Fortessa with HTS
| Lasers: 355, 405, 488, 561, 640 nm. HTS system
| FACS Analyzer
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
BD FACS ARIA III
| 4-way sorting. Lasers: 375nm, 405nm, 488nm, 561nm, 633nm
| FACS Sorter
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
BD FACS ARIA III
| 4-way sorting. Lasers: 407, 488, 561, 633nm
| FACS Sorter
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
BD FACS Melody
| 4-way sorting. Lasers: 405, 488, 640 nm
| FACS Sorter
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
BigFoot Sorter
| Lasers: 405, 488, 561, 640 nm. High throughput, Single-cell fast sorting
| FACS Sorter
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
FACSDiscover S8
| Full spectrum and image-based cell sorter, lasers: 349, 405, 488, 561 and 637 nm
| FACS Sorter
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
TYTO
| Contamination-free within the disposable, fully closed MACSQuant Tyto Cartridge
| FACS Sorter
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
3D Printing
| Basic 3D printing printers with high volume pinting capabilties
| FDM 3D printing
| Architecture recources center - TCOM Digital Lab
| Yair Rahabi |
| |
|
Molecular Vapor Deposition (AMTS 100E)
| | Film deposition
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Plasma-Assisted Atomic Layer Deposition
| Ultratech/ Cambridge Nanotech Fiji G2
| Film deposition
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Film Processor
| X-ray film processor - For radioactive and ECL membranes
| Film developing processor
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Film stress measurement (Tencor FLX-2320)
| | Film stress measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Ellipsometer Multi-layer measurements
| Wave length 193-2500nm
| Film thickness and refractive index measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Software: Cytobank
| Cloud-based platform for the analysis, storage, and sharing of flow and mass cytometry data
| Flow cytometry Data analysis software
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Software: FCS Express
| Flow cytometry data analysis software
| Flow cytometry Data analysis software
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Software: FCS Express / FlowJo
| Flow Cytometry analysis
| Flow cytometry Data analysis software
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
Software: FlowJo
| Flow cytometry data analysis software
| Flow cytometry Data analysis software
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Olympus SZX16 Fluorescent Binocular
| 2 Objectives: X0.8 and X1.6
| Fluorescence Binocular
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Axio Imager Z1 upright microscope
| Fully motorized upright fluorescent microscope. Equipped with a camera.
Motorization includes: Z sectioning, objectives, filters, light and fluorescence intensities
| Fluorescence Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Axio Imager Z2 upright
| Upright microscope. Suited for fixed specimens. Motorized stage and X-cite metal halide light illumination, High resolution monochrome Zeiss Axiocam 807 camera , and Zeiss Axiocam 105 color camera for brightfield and polarized light.
| Fluorescence Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Axio observer inverted
| Inverted microscope for transmitted and fluorescence widefield microscopy of fixed specimens and time lapse of live samples
| Fluorescence Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Leica DMI8 inverted Fluorescent Microscope
| Monochrome and color camera. Inverted. For fluorescence and histology imaging
| Fluorescence Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Zeiss Cell Observer inverted Fluorescent Microscope
| Fully incubated, 2 cameras: HD and HS. Inverted. Live imaging
| Fluorescence Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Zeiss Celldiscoverer 7
| High content screening live cell inverted widefield imaging system
| Fluorescence Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Qubit
| DNA/RNA quantification
| Fluorimeter for DNA/RNA quantification
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
GE OEC 9900 elite Fluoroscope
| Fluoroscope
| Fluoroscope
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Pulsed Electric Field (PEF)
| 24KV 20µs 300Hz
| Food Technology - Cell Perforation
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Tweedy Mixer for Dough
| High shear strength. up to 15 Kg
| Food Technology - Dough
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Drum Dryer Vaccum
| 4 l/hr
| Food Technology - Drying
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Freeze Driers
| Drying liquids into powder. up to 3 Kg batch
| Food Technology - Drying
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Spray Dryer
| Drying liquids into powder. 1~2 Kg/hr
| Food Technology - Drying
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Stirred falling film evaporator
| 30 l/hr
| Food Technology - Evaporation
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Sensory Evaluation Lab
| Designed per ISO 8589 standards
| Food Technology - Food
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
HPP
| Up to 8000 bar
| Food Technology - High pressure processing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Double jacket mixing steam pot
| 15L
| Food Technology - Mixing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Stephan mixer
| 15L
| Food Technology - Mixing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Plate Heat Exchanger
| Up to 6 lit/min, 100 °C
| Food Technology - Pasteur
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Continuity Centrifuge
| Liquid liquid. Solid liquid. 17000 g. 5 lit/min
| Food Technology - Separation
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
UF Filtration
| 0.54 square meter Membrane
| Food Technology - Separation
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Dry extruder (TVP) + coextrusion
| | Food Technology - Shape Processing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Food high moisture extruder
| 1 kg/hr. Dual screw
| Food Technology - Shape Processing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
High Pressure Homogenizer
| 1500 bar. 0.25 lit/min
| Food Technology - Size Reduction
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Various Grinder and Millers
| | Food Technology - Size reduction
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Electro heating – Ohmic heater
| | Food Technology - Sterilization
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Steam food Autoclave
| Measured Inner Package tmp via Process
| Food Technology - Sterilization
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
FTIR
| | FTIR
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
FTIR
| Nicolet iS-50, Thermo, (ATR, FT-IR) 500- 4000cm-1
| FTIR
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Nicolet FTIR Spectrometer
| Diamond ATR
| FTIR
| The Center for Research in Environmental Engineering,
Analytical Laboratory for Micro-Pollutants
| Nura Azzam |
| | |
Nicolet iS50 FTIR Spectrometer (Thermo Scientific)
| The Nicolet iS50 FTIR is equipped with VeeMAX III specular reflection accessory with ATR (PIKE Technologies), offering continuous variable angle of incidence and a variety of crystal plates to selectively control the depth of penetration of the IR beam into the sample. ATR applications include the study of layered samples, coatings, release agents, monolayers on silicon and chemical migration studies.
| FTIR
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
JGMaker
| Dual independent extruders, different filaments (PLA, Pet-g, ABS)
| Fused deposition modelling (FDM)
| IMT- Israel Institute of Materials Manufacturing Technologies
| Leonid Chernobylskiy |
| |
|
Pentax EPK-1 Gastroscope and Colonoscope
| Gastroscope and Colonoscope
| Gastroscope and Colonoscope
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Gas-Chromatograph (GC) – Agilent 7890A
| It is used to analyze and identify volatile substances in the gas or liquid phase. The GC is equipped with TCD and FID detectors as well as CTC auto sampler unit and a controlled valve system for continuous sampling. Development of techniques to evaluate H2 and O2 in complicated system is also possible.
| GC Chromatography
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Fusion FX7 Edge Spectra
| Chemiluminescence, UV, IR and RGB epi-illumination for fluorescence and white epi- and transillumination detection
| Gel Documentation System
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Glove Box (VTI)
| The glove box provides a high quality controlled environment, designed for handling materials sensitive to oxygen and water. The attainable purity of this system is H2O < 1ppm, O2 < 1ppm. The workstation is equipped with large and small antechambers and a user-friendly PLC controller.
| Glove Box
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
