Leica UC7 Ultramicrotome
| Thin sections preparation for TEM, surface polishing of SEM samples.
| Electron microscopy specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Ellina Kesselman |
|  |
|
ARC. Architecture recources center
| Architecture and town planning
| | Architecture recources center
| Ezra Ozery |
| |
|
Computational Structural Biology
| | Molecular Dynamics, Energetic interactions, HotSpots, AlphaFold modeling
| Technion Center for Structural Biology - Computational
| Fabian Glaser | | |
|
Computational Structural Biology
| | RosettaFold, complex modeling
| Technion Center for Structural Biology - Computational
| Fabian Glaser | | |
|
Bionova X - DLP 3D Bioprinter
| Bioprinting of cells and biomaterials
| 3D Bioprinting
| 3D Bioprinting Center for printing Cells and Biomaterials
| Galia Ben-David |
| |
|
Envision TEC GmbH 3D- Bioplotter Manufacturer
| Multi channel bioprinting of cells and biomaterials
| 3D Bioprinting
| 3D Bioprinting Center for printing Cells and Biomaterials
| Galia Ben-David |
| |
|
PFIB - Helios 5 PFIB Cxe
| HRSEM, EDS, TEM lamella preparation (large cross sections), nano-patterning
| Plasman Focused Ion Beam
| EMC - The Electron Microscopy Center
| Galit Atiya |
| |
|
Aspect M2 1 T MRI
| 1 Tesla MRI for in vivo small animal (rodent) and ex vivo studies
| MRI
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
Bruker 9.4 T MRI
| 9.4 Tesla MRI for in vivo small animal (rodent) anatomical and functional MRI, cardiac imaging, dynamic contrast enhancement, functional brain imaging and angiography.
| MRI
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
Bruker SkyScan 1276 MicroCT
| High speed, high resolution ex-vivo and in-vivo micro-CT scanner. Spatial resolution down to 2.8µm ex-vivo and 10µm in-vivo
| CT
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
IVIS Lumina X5
| Quantitative fluorescence and bioluminescence imagin, with high-resolution 2D X-ray
| In Vivo Imaging System
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
IVIS Spectrum CT
| Quantitative fluorescence and bioluminescence imaging with spectral unmixing and low dose CT imaging
| In Vivo Imaging System
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
MILabs VECTor7 PET/SPECT/CT/OI
| PET/SPECT/CT/OI system for small animals
| In Vivo Imaging System
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
US Vevo 3100
| In-vivo ultrasound imaging in rodent for anatomical, morphological and functional 2D/3D imaging
| Micro-ultrasound
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
X-rad 320 Irradiator
| X-ray irradiation system for small animals nd biological specimens, capable of delivering a precise radiation dosage.
| X-ray irradiation system
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
AI & HPC cluster
| GPU servers
| GPU servers
| AI & HPC cluster
| Gennadi Zaidsher |
| |
|
Gamry Reference 3000 Potentiostat / Galvanostat
| low currents, high voltage
| Electrochemical research/corrosion tesing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
PPS AFX3150 Power Source
| AC+DC, up to 800V, 100A, asymetrical waveforms
| | IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
Salt Spray Cabinet
| 450L, prohesion option
| Corrosion testing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
Versastat 3 Potentiostat / Galvanostat
| low currents
| Electrochemical research/corrosion tesing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
| | |
3D Scanning
| Eva Lite scanner from Artec 3D
| Laser scanner
| Architecture recources center - Media Lab
| Haim Zinger | | |
|
Large scale Drone scans
| DJI Mavic pro2
| Drone flight
| Architecture recources center - Media Lab
| Haim Zinger | | |
|
Video recording studio
| | Professional cameras and recording equipment
| Architecture recources center - Media Lab
| Haim Zinger | | |
|
Amino acids identification and relative/absolute quantification (Orbitrap Exploris 240/Q Exactive)
| Identification and relative quantification of polyamines and acetylated form in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Bile Acids identification and relative quantification (Orbitrap Exploris 240/Q Exactive)
| Identification and relative quantification of 30 bile acids in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Fatty acids (free and total pool) identification and relative quantification (Orbitrap Exploris 240/Q Exactive)
| Identification and relative quantification of 90 fatty acids (free and total pool) in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Glycolysis Stress Test
| Measures the capacity of the glycolytic pathway after glucose starvation.
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
In vivo / In vitro Stable isotope tracing for tracking specific pathways (Orbitrap Exploris 240)
| In vitro or in vivo stable isotope tracing for tracking specific metabolic pathways. All tracers are supported (e.g., 13C6-Glucose, 13C5-Glutamine, etc.)
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Lipidomics Services
| Lipidomics Services
| Lipidomics
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Lipidomics profiling (Orbitrap Exploris 240)
| Lipid profiling of different lipid families (glycerolipids, phospholipids, sphingolipids, Glycerophospholipids, Sterol Lipids, etc.)
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Media nutrients consumption / secretion absolute quantification (Orbitrap Exploris 240/Q Exactive)
| Media nutrients secretome and consumption profiling; including absolute quantification
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Metabolomics Services
| Metabolomics Services
| Metabolomics
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Mitochondrial Stress Test
| Assessing mitochondrial function: basal respiration, ATP-linked respiration, maximal and reserve capacities, and non-mitochondrial respiration.
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Palmitate Oxidation Stress Test
| Intrinsic rate and capacity of a cell to oxidize palmitate in the absence or limitation of other exogenous substrates.
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Polar metabolomics profiling (Orbitrap Exploris 240/Q Exactive)
| Polar metabolites profiling with a in-house library of 550 metabolites - identification and relative quantification in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Polyamines identification and relative quantification (Orbitrap Exploris 240/Q Exactive)
| Identification and relative quantification of Polyamines and acetylated foem in dicers sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Real-Time ATP Rate Assay
| Quantification of the rate ATP production from glycolysis and mitochondria simultaneously using label-free technology in live cells
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Seahorse XFe96 Metabolic Flux Analyzer
| Real-time measurement of cellular metabolism in live cells
| Metabolomics
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Seehorse
| Real-time measurement of cellular metabolism in live cells
| Metabolomics
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Substrate Oxidation Stress Test
| Interrogation of three primary substrates that fuel the mitochondria: long chain fatty acids, glucose/pyruvate, and/or glutamine by blocking each pathway and measuring the cells' dependencies
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Untargeted metabolomics (Orbitrap Exploris 240)
| Untargeted analysis (polar/non polar metabolites); metabolic phenotype in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Microscope system Axioskop 40, ZEIS
| | Confocal Microscope
| Grand Water Research Institute (GWRI)
| Ilana Barzilay |
| | |
Real-time qPCR system
| | Real-time PCR
| Grand Water Research Institute (GWRI)
| Ilana Barzilay |
| | |
Spherical array probe
| Spherical array probe for volumetric real-time optoacoustic imaging at several mm-depths
| optoacoustic imaging system
| National Center for Imaging and Brain Stimulation
| Inbar Brosh |
| | |
TECNIPLAST ZEB TEC+ZEBTEC Active-Blue stand alone
| Zebrafish facility
| Zebrafish infrastructure
| Zebra Fish Infrastructure
| Inbar Brosh |
| | |
Two photon microscope
| Two photon microscope for ultra-rapid volumetric in vivo imaging and stimulation
| Multiphoton Microscope
| National Center for Imaging and Brain Stimulation
| Inbar Brosh |
| | |
LEAP 6000 XR APT
| Mass spectometry, MCP detector
| Atom Probe Tomography
| The Israeli Center of Atom Probe Tomography (ICAPT)
| Inbar Freilich |
| |
|
3FLEX Porosity Analyzer
| Micromeritics, measuring BET, pore size / volume of micro / meso porous materials
| 3FLEX porosimeter
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
AccuPyc Density Analyzer
| Micromeritics, measuring density of powders, solids, and slurries
| AccuPyc density analyser
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
DCS 3+
| DSC 3+ system (from -150oC up to 500oC), Mettler Toledo
| DCS 3+
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
DMA Analyzer
| MCR 702e Multi Drive (Anton Paar) is instrument for the dynamic mechanical analysis of solid, soft, and liquid samples. Perform dynamic mechanical analysis in bending, tension, compression, and torsion, standard and highly sophisticated rheological measurements as well as thermomechanical analysis (TMA) with one instrument.
| DMA analyzer
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
FTIR
| | FTIR
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
FTIR
| Nicolet iS-50, Thermo, (ATR, FT-IR) 500- 4000cm-1
| FTIR
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
TGA/DSC 3+ system
| TGA/DSC 3+ system (from 20oC up to 1500oC), Mettler Toledo
| TGA/DSC 3+ system
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
TriStar Porosity Analyzer
| Micromeritics, measuring BET, pore size / volume of meso porous materials
| TriStar porosimeter
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
GC-MS
| Connected to PAL sample injector that enables liquid, headspace and SPME injections with the same autosampler
| Chromatography; Mass Spectrometry
| The Center for Research in Environmental Engineering,
Analytical Laboratory for Micro-Pollutants
| Irena Kuzmenkov |
| | |
Dilatometer (DIL 402 Expedis Select, Netzsch)
| Dilatometry is the method of choice for highly precise measurement of dimension changes to solids at a programmed temperature change and with negligible sample strain. The dilatometer in the FC lab is equipped with a dual pushrods system that enables doing measurements in a dual or a differential mode. The maximum sample temperature is 1150°C, the range of heating rates is 0.001-50 K/min. Measurements could be done in vaccuum, nitrogen or argon atmospheres. Samples of diameters 4,6 and 8 mm and lengths up to 52 mm could be tested. Several reference samples made of Aluminium Oxide are avalable.
| Dilatometer
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Glove Box (VTI)
| The glove box provides a high quality controlled environment, designed for handling materials sensitive to oxygen and water. The attainable purity of this system is H2O < 1ppm, O2 < 1ppm. The workstation is equipped with large and small antechambers and a user-friendly PLC controller.
| Glove Box
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Laser cutter (VLS 4.60, Universal Laser Systems)
| Laser cutting technology enables cutting complex shapes without the need for tooling. During the laser cutting procedure, there is laser beam used to cut different materials like plastic, wood, rubber, etc. The technology also can be used for marking and engraving. The laser cutter is equipped with 60W power laser and a standard 2 inch focusing lens, the average size of a focus point is 0.127mm. High-Power Density-Focusing Optics (HPDFO) lens that gives much smaller focus point (0.025mm) is also available.
| Laser cutter
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Membrane Test System (MTS) (Scribner)
| The 740 MTS is intended for studying new ionomers and solid electrolyte materials. It offers rapid and accurate measurements of membrane resistance and conductivity as a function of temperature, humidity and pressure without a need of catalyzing a membrane and preparing a membrane-electrode assembly. The size of a membrane sample that is necessary for a measurement is 6X30 mm.
| Membrane Test System
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
PEM Fuel Cells test stations (850e, Scribner)
| The 850e system is a complete test station for operation and measurement of PEM/DMFC fuel cells. 4 test stations are available in the laboratory. The system can be operated in 5/25/50 A current ranges, maximum load power is 100W. The available cell fixtures are suitable for testing cells with active aresa of 5cm2 and 25 cm2. Three test stations are equipped with a humidifyer bypass for wet/dry testing and with a multygas system for switching between various gases during one test. Two are equiped with automatic back pressure unit.
| PEM Fuel Cells test station
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Planetary mono mill (PULVERISETTE 6, Fritsch)
| Planetary Mill is used for fine grinding of hard, medium-hard, soft, brittle, tough and moist materials. The maximum rotational speed of the mill in FC lab is 650 rpm. The minimum volume of a grinded sample is 10 ml. Two grinding bowls, 80 ml and 250 ml volume, and grinding balls of 5mm and 10mm diameter, all made of Zirconium Oxide are available.
| Planetary mono mill
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Rotating Ring Disk Electrode (RRDE) -3A Apparatus,
| RRDE-3A is a constant rotation system for use in hydrodynamic modulation rotating ring disk electrochemistry. It could be operated also as RDE. Rotation speed range is 100-8000 rpm. Electrodes are compact and rapidly interchangeable. The unit provides an adjustable valve system for inert gas purging inside the cell vial.The system is connected to VSP potentiostat (BioLogic), allowing performance of electrochemical measurements.
| Rotating Ring Disk Electrode (RRDE)
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Screen printer (MSP-485, HIM)
| Screen printing is a printing technique whereby a mesh is used to transfer ink onto a substrate, except in areas made impermeable to the ink by a blocking stencil. Mesh/stencil is uniq for each work, so every user is requered to prepare his/her own mesh(s) and stencil(s). The maximum printing area is 8 x 8 inch.
| Screen printer
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Solid Oxide Fuel Cells test station (X-20, Greenlight)
| The Greenlight X20 SOFC test station is a testing platform that is equipped with a button cell fixture for testing coin cell samples of 25mm diameter. The maximum temperature of tests is 1000 °C. The power range of the test station is up to 100W.
| Solid Oxide Fuel Cells test station
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Vapor Sorption Analyser (VTA-SA+, TA instruments)
| The VTI-SA+ Vapor Sorption Analyzer is a continuous vapor flow sorption instrument for obtaining precision water and organic vapor isotherms at temperatures ranging from 5°C to 150°C at ambient pressure. The maximum weight of a sample that can be tested is 750mg.
| Vapor Sorption Analyser
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Building Research Technologies
| Civil Engineering
| National Building Research Institute
| National Building Research Institute
| Izhake Elhanan | | | |
Xray Photoelectron Spectroscopy (XPS, VersaProbe III)
| XRay Photoelectron Spectroscopy (XPS)
| XRay Spectroscopy
| Surface Science Characterization Center
| Kamira Cohen Weinfeld |
| |
|
Atomic Force Microscope with electrochemical capabilities
| The Cypher ES Environmental AFM provides an exceptional performance in resolution, speed and stability in standard contact and tapping modes. It is compatible with a complete range of modes and accessories. In addition, it enables studying samples in controlled gas or liquid environments, doing electrochemical experiments and measuring conductivity of samples.
| AFM
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
AutoChem II 2920 Chemisorption Analyzer
| The instrument enables the researcher to obtain valuable information about the physical properties of catalysts, catalyst support, and a variety of other materials. Researchers can investigate active metal surface area, surface acidity, distribution and strength of active sites, BET surface area, and more. The AutoChem II performs pulse chemisorption, temperature-programmed reduction (TPR), desorption (TPD), oxidation (TPO), and reaction analyses. Multiple experiments can be run using the same sample.
| Chemisorption Analyzer
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Controlled Intensity Modulated Photocurrent Spectroscopy
| CIMPS is a photo-electrochemical system for the advanced characterization of photoelectrodes. It measures the response of the photoelectrodes to modulated light intensity by generating an AC current.
| Photo-electrochemistry
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Dry/ Wet Electrochemical Characterization Station
| Ivium nStat is a multi-channel Potentiostat/Galvanostat with an integrated impedance analyzer. The nStat has four potentiostats, each potentiostat is a completely independent instrument. The instrument is designed for a wide range of applications, such as battery/fuel cell-testing, electrode development, biotechnology and other Electrochemical Research applications.
| Potentiostat/galvanostat
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Gas-Chromatograph (GC) – Agilent 7890A
| It is used to analyze and identify volatile substances in the gas or liquid phase. The GC is equipped with TCD and FID detectors as well as CTC auto sampler unit and a controlled valve system for continuous sampling. Development of techniques to evaluate H2 and O2 in complicated system is also possible.
| GC Chromatography
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Kelvin Probe (NRH020 KP Technologies)
| The Nitrogen Relative Humidity Chamber is equipped with a non-scanning Kelvin Probe, which is a non-contact, non-destructive vibrating capacitor device used to measure the work function of conducting materials or surface potential of semiconductors. This system is equipped with a high intensity monochromator light source (Horiba Jobin Yvon S.A.S) that enables measuring CPD at different wavelengths.
| Kelvin Probe
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Nicolet iS50 FTIR Spectrometer (Thermo Scientific)
| The Nicolet iS50 FTIR is equipped with VeeMAX III specular reflection accessory with ATR (PIKE Technologies), offering continuous variable angle of incidence and a variety of crystal plates to selectively control the depth of penetration of the IR beam into the sample. ATR applications include the study of layered samples, coatings, release agents, monolayers on silicon and chemical migration studies.
| FTIR
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
PEM and AEM Water Electrolyzers
| Comprehensive testing of membrane and catalyst integration under controlled conditions to evaluate performance metrics such as current density, efficiency, and durability.
Hardware size: up to 5 cm2.
| Water Electrolyzers
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| | |
Profilometer (DekTak Bruker)
| A stylus (contact) profilometer that is used to measure height differences (steps) on samples, and serves as a characterization tool for measuring thin film thickness and surface roughness.
| Profilometer
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Solar Simulator (Abet, USA)
| The Solar Simulator is a light source for testing photoelectrodes and photocatalysts under standard illumination conditions.
| Solar Simulator
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
TGA SETSYS Evolution
| Thermogravimetry analysis- The system is equipped with a microbalance that has a capacity of 35g (electronic resolution 0.02mg), temperature range of ambient to 1600°C with scanning temperature rate from 0.01 to 99.99°C/min, and an advanced gas panel, which allows mixing a carrier gas with an auxiliary/reactive gas.
| TGA
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Ultrasonic Spray Deposition (ExactaCoat, Sono-Tek)
| A fully-enclosed, programmable 3-axis robot integrated ultrasonic spraying system designed for depositing active layer solutions to produce thin film.
| Ultrasonic Spray Deposition
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Histology Services Laboratory
| Tissue processing, paraffin and frozen sectioning, staining
| Histology Services Laboratory
| Biomedical Core Facility (BCF)
| Katren Sakran |
| |
|
Leica CM1850 Cryostat
| Frozen sectioning
| Cryostat
| Biomedical Core Facility (BCF)
| Katren Sakran |
| |
|
Leica RM 2135 Microtome
| Paraffin sectioning
| Microtome
| Biomedical Core Facility (BCF)
| Katren Sakran |
| |
|
ATM, Brillant 220
| Small samples, high accuracy, constant cooling
| Metallographic cut-off machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Briviscop 3000H
| Up to 3000 kgf load with 10mm ball indenter
| Brinell Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Buehler Macromet-3
| Automatic measurement, digital
| Rockwell Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
FutureTech, FM-110
| Automatic meaurement, Knoop, from 10gf up to 1000gf load
| Micro-Vickers Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
FutureTech, FV-110
| Automatic meaurement, from 1kgf up to 100kgf load
| Vickers Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Materials Manufacturing Technologies
| The Israel institute of Materials Manufacturing Technologies
| The Israel institute of Materials Manufacturing Technologies
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Nikon, LV150
| Up to X1000, brightfield, darkfield, contrast.
| Optical microscope
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Struers, CitoPress-5
| Automatic, high speed, 15mm/ 30mm samples
| Metallographic samples hot mounting press
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Struers, Discotom-10
| Large chamber, constant cooling
| Metallographic cut-off machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Struers, Lavamin
| Automatic, effective cleaning, drying
| Metallographic samples cleaning
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Struers, ProntoPress
| Automatic, low speed, 15mm / 30mm / 45mm samples
| Metallographic samples hot mounting press
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Struers, Tegramin-25
| Grinding / Polishing, Automatic
| Metallographic samples preparation
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Single point BET Micromeritis
| iSAF – Single-point SSA (Specific Surface Area) measurement, used to determine the surface area of a material per unit mass, commonly expressed in m²/g. It is a faster alternative to the multipoint BET method, particularly use…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Room temperature GPC
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
GC with TCD and FID detectors
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Small-size reactors
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Potentiometric titrator (751 GPD Titrino, Metrohm)
| iSAF – This instrument can determine the concentration of a given analyte, which helps to determine the amount of ion exchange group of membrane samples.
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
