Gamry Reference 3000 Potentiostat / Galvanostat
| low currents, high voltage
| Electrochemical research/corrosion tesing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Gennady Kozyukin |
|  | |
FutureTech, FV-110
| Automatic meaurement, from 1kgf up to 100kgf load
| Vickers Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
FutureTech, FM-110
| Automatic meaurement, Knoop, from 10gf up to 1000gf load
| Micro-Vickers Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Fusion FX7 Edge Spectra
| Chemiluminescence, UV, IR and RGB epi-illumination for fluorescence and white epi- and transillumination detection
| Gel Documentation System
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Furnace Nabertherm T10/11
| Electrically heated furnace for melting and holding, max. temp. 1100 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Furnace Nabertherm N250/85 HA
| Air circulation chamber furnace, max. temp. 850 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Furnace Nabertherm HT 40/18
| High temperature furnace with fibre insulation, max. temp. 1800 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Furnace Nabertherm HT 40/16
| High temperature furnace with fibre insulation, max. temp. 1600 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
FTIR
| | FTIR
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
FTIR
| Nicolet iS-50, Thermo, (ATR, FT-IR) 500- 4000cm-1
| FTIR
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Freeze Driers
| Drying liquids into powder. up to 3 Kg batch
| Food Technology - Drying
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Freestanding transfer station for 2D materials
| | 2D materials transfer
| 2D Materials
| Assael cohen |
| |
|
Foseco rotary degassing machine
| Rotary degassing of aluminium alloys
| Mechanical distributing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Formulator, Formulatrix
| Flexible liquid dispensing for optimizing protein crystallization conditions
| Protein Crystallography
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Food high moisture extruder
| 1 kg/hr. Dual screw
| Food Technology - Shape Processing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Film stress measurement (Tencor FLX-2320)
| | Film stress measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Film Processor
| X-ray film processor - For radioactive and ECL membranes
| Film developing processor
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
FEI Tecnai G2, Cryo-TEM and TEM
| Cryo-TEM, TEM
| Electron microscopy
| Technion Center for Electron Microscopy of Soft Matter
| Olga Kleinerman |
| |
|
Fatty acids (free and total pool) identification and relative quantification (Orbitrap Exploris 240/Q Exactive)
| Identification and relative quantification of 90 fatty acids (free and total pool) in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
FACSymphony A5 SE with HTS
| Spectral-enabled cell analyzer. Lasers: 349, 405, 488, 561, 637nm. HTS system
| FACS Analyzer
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
FACSDiscover S8
| Full spectrum and image-based cell sorter, lasers: 349, 405, 488, 561 and 637 nm
| FACS Sorter
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Ez-50 LLOYD Universal Material Testing Machine
| Mechanical properties measurement (tension, compression)
| Mechanical Properties - Twin column design with acrosshead travel
| The Russell Berrie Nanoparticles and Nanometric System Characterization Center
| Sigal Eichler |
| |
|
Exosomes analysis- Q Exactive HFX
| Identification and quantification of proteins from purified exosomes
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
EXCITECH SHMS1325C CNC ROUTER
| 1.22m * 2.44m work envelope CNC routing machine soft materials
| CNC Routing
| Architecture recources center - TCOM Digital Lab
| Yair Rahabi |
| |
|
EXCITECH CNC ROUTER 5 axis
| Large volume CNC routing machine soft materials
| CNC Routing
| Architecture recources center - Design-tech
| Cris Nannig | | |
|
EQX-850 LDLS – High Brightness, Laser-Driven Light Source
| iSAF – Wavelength Range: 170 nm – 2500 nm Plasma Size (FWHM): With Retro: 140 μm X 290 μm Dual Output: 120 μm X 280 μm Numerical Aperture: 0.58 NA Bulb Lifetime: 10,000 hours Distance of Plasma from Output Window 13.7 mm La…
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Eppendorf Centrifuge 5804
| iSAF – Max. capacity: 4 × 250 mL/2 × 5 MTP, Swing-bucket rotors and adapters accommodate tubes and bottles from 0.2 mL to 250 mL. Plate rotor for centrifugation of all types of MTP, PCR, cell culture, or Deepwell Plates
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Envision TEC GmbH 3D- Bioplotter Manufacturer
| Multi channel bioprinting of cells and biomaterials
| 3D Bioprinting
| 3D Bioprinting Center for printing Cells and Biomaterials
| Galia Ben-David |
| |
|
EmulsiFlex C3
| High-Pressure Homogenizer
| High-Pressure Homogenizer
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
EM AFS2
| Freeze Substitution and Low Temperature Embedding System
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Ellipsometere J.A. Woollam, M-2000UI
| Optical thickness meeasurment by polarised light
| Optical measurment
| RBNI Sputtering Lab
| Andrey Wolf |
| |
|
Ellipsometer Multi-layer measurements
| Wave length 193-2500nm
| Film thickness and refractive index measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Ellipsometer Multi-layer measurements
| Optical thickness meeasurment by polarised light, wave length 193-2500nm (Woollam VASE)
| Optical measurment
| RBNI Sputtering Lab
| Andrey Wolf |
| |
|
Electro heating – Ohmic heater
| | Food Technology - Sterilization
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
ECM analysis- Q Exactive HFX/Exploris 480 MS
| Identification and quantification of proteins from extracellular matix
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
E-Beam Lithography (Raith EBPG 5200)
| | Nano e-beam lithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (VST TFDS-184)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (Evatec BAK-501A)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (Airco Temescal FC 1800)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
E-beam Evaporator (Airco Temescal BJD 1800)
| | Evaporator
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Dual beam Ga+ Helios G3 FIB+SEM
| Ga+ FIB, HRSEM, EDS, EBSD. Material cross- srectioning, TEM lamella preparation, failure analysis, nano-patterning, high resolution imaging.
| HRSEM and (Ga+) FIB
| RBNI FIB Lab
| Larisa Popilevsky |
| | |
Dry/ Wet Electrochemical Characterization Station
| Ivium nStat is a multi-channel Potentiostat/Galvanostat with an integrated impedance analyzer. The nStat has four potentiostats, each potentiostat is a completely independent instrument. The instrument is designed for a wide range of applications, such as battery/fuel cell-testing, electrode development, biotechnology and other Electrochemical Research applications.
| Potentiostat/galvanostat
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Dry Film Laminator (JSE JSL-1200)
| Photolithography film laminator
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Dry extruder (TVP) + coextrusion
| | Food Technology - Shape Processing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Drum Dryer Vaccum
| 4 l/hr
| Food Technology - Drying
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Drilling machine
| Used to cut holes in a workpiece
| Drilling
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Dr. Natalie Shaffer distance learning studio
| | Video productions
| The Center for Promotion of Learning and Teaching
| Olga Chuntonov | | |
|
Double jacket mixing steam pot
| 15L
| Food Technology - Mixing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
DMA Analyzer
| MCR 702e Multi Drive (Anton Paar) is instrument for the dynamic mechanical analysis of solid, soft, and liquid samples. Perform dynamic mechanical analysis in bending, tension, compression, and torsion, standard and highly sophisticated rheological measurements as well as thermomechanical analysis (TMA) with one instrument.
| DMA analyzer
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Dilatometer (DIL 402 Expedis Select, Netzsch)
| Dilatometry is the method of choice for highly precise measurement of dimension changes to solids at a programmed temperature change and with negligible sample strain. The dilatometer in the FC lab is equipped with a dual pushrods system that enables doing measurements in a dual or a differential mode. The maximum sample temperature is 1150°C, the range of heating rates is 0.001-50 K/min. Measurements could be done in vaccuum, nitrogen or argon atmospheres. Samples of diameters 4,6 and 8 mm and lengths up to 52 mm could be tested. Several reference samples made of Aluminium Oxide are avalable.
| Dilatometer
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Dicer (Disco DAD3350)
| | Dicing
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Depowdering station
| Job box lift station (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
DCS 3+
| DSC 3+ system (from -150oC up to 500oC), Mettler Toledo
| DCS 3+
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
CytoFLEX LX, 5 lasers, HTS
| Lasers: 375, 405, 488, 561, 635 nm. HTS system, High sensitivity, High resolution.
| FACS Analyzer
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
CyTOF Helios
| Measure up to 50 parameters at the single cell level
| Mass Cytometry
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Cytek Aurora
| Lasers: 405, 488, 561, 642 nm. HTS system, 48 channels
| Spectral flow analyzer
| Life Sciences and Engineering Infrastructure Center (LSE)
| Aviv Lutaty |
| |
|
CytAssist (10x Genomics)
| Spatial transcriptomics
| Spatial transcriptomics based on NGS
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
CVD for growth Graphene
| CVD for growth Graphene, hBN and TMDC, Transfer station , Furnce annealing, and Raman spectroscopy
| CVD
| 2D Materials
| Assael cohen |
| |
|
Curing Oven-400v
| Drying cabinet - 200 C (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Cryo - SEM and HRSEM - Zeiss Ultra Plus FEG SEM
| Cryo-SEM, HR-SEM, EDS
| Scanning electron microscopy
| Technion Center for Electron Microscopy of Soft Matter
| Olga Kleinerman |
| |
|
CosMx (Nanostring)
| Single-cell spatial transcriptomics
| Spatial transcriptomics based on in-situ
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Controlled Intensity Modulated Photocurrent Spectroscopy
| CIMPS is a photo-electrochemical system for the advanced characterization of photoelectrodes. It measures the response of the photoelectrodes to modulated light intensity by generating an AC current.
| Photo-electrochemistry
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Controlled environment vitrification system (CEVS)
| Cryo-TEM specimen preparation under controlled conditions
| Electron microscopy specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Ellina Kesselman |
| |
|
Continuity Centrifuge
| Liquid liquid. Solid liquid. 17000 g. 5 lit/min
| Food Technology - Separation
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Contact Mask Aligner with BSA (KARL SUSS MJB3)
| Photolithography exposer
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Contact Mask Aligner (KARL SUSS MA-6)
| Photolithography exposer
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Contact Angle Goniometer
| Contact Angle Goniometer
| Contact angle measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Confocal Zeiss LSM 980 AiryScan
| Lasers: 405, 454, 488, 514, 543, 639nm. Spectral detector, AiryScan, uper-resolution. Full incubation for live imaging
| Confocal Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Confocal Zeiss LSM 900 Upright
| Lasers: 405 488 561 640 nm upright microscope, Airyscan2 super resolution detector, MLPX 2 and 4; 2 GaAsP detectors
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Confocal Zeiss LSM 900 Inverted
| Lasers: 405 488 561 640 nm inverted microscope, Airyscan2 super resolution detector, MLPX 2 and 4; 2 GaAsP detectors
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Confocal Zeiss LSM 880 multi photon
| Lasers: 458, 477, 488, 514, 561, 633 nm and multi-photon tunable laser 690-1040 nm and Spectral imaging
| Confocal Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Confocal Zeiss LSM 880
| Lasers: 405, 458, 488, 514, 561, 633 nm upright microscope Airyscan super resolution detector, Fast mode, GaAsP- spectral detector
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Confocal Zeiss LSM 710
| Inverted confocal, Lasers: 405, 454, 488, 514, 543, 639nm. GaAsP detectors. Full incubation for live imaging
| Confocal Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Confocal Zeiss LSM 700
| Lasers: 405, 488, 555, 633 nm Inverted microscope
| Confocal Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Confocal Zeiss LSM 700
| Inverted confocal, Lasers: 405, 488, 555, 639 nm
| Confocal Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Computational Structural Biology
| | Molecular Dynamics, Energetic interactions, HotSpots, AlphaFold modeling
| Technion Center for Structural Biology - Computational
| Fabian Glaser | | |
|
Computational Structural Biology
| | RosettaFold, complex modeling
| Technion Center for Structural Biology - Computational
| Fabian Glaser | | |
|
Combustion test facility for SAF testing
| iSAF equipment
| Analyzers
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Combined EEG-fMRI
| Simultaneous EEG-fMRI for human
| EEG-fMRI
| May Blum Dahl Technion Human MRI Research Center (TecH MRC)
| Daphna Link-Sourani |
| |
|
Clean room
| Clean room 100,000
| Equipment Assembly
| Asher Space Research Institute
| Lee Nudel |
| |
|
Chromium X (10x Genomics)
| Single cell RNA-seq, single cell TCR/BCR sequencing, multi omics
| Single Cell Technology
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Chemical kinetic Model generation using the Reaction Mechanism Generator software
| iSAF equipment
| Computational
| iSAF - The Israeli Sustainable Aviation Fuel
| Keren-Or Rosner |
| |
|
Cerhec S.A.R.L.
| Laboratory furnace for tensile testing (up to 800 deg C)
| Laboratory furnace
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
CEM Cop. (Discover) microwave reactor
| CEM Cop. (Discover) microwave reactor
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
CDs Optical Measurements
| CDs Optical Measurements (Vickers micro-system)
| Dimension measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Carbolite Gero furnace HTK 25 GR
| The graphite furnace operates with vacuum or gases Nitrogen / Argon. Max. temp. 2200 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
C-V Plotter (MDC)
| | C-V measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Building Research Technologies
| Civil Engineering
| National Building Research Institute
| National Building Research Institute
| Izhake Elhanan | | | |
Buehler Macromet-3
| Automatic measurement, digital
| Rockwell Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Bruker Ultima 2-Photon Plus
| Tunable laser (680–1300 nm) and Fixed output: 1045 nm, 4 GaAsP PMT channels, Galvo and resonant scanners, ETL focus
| 2 Photon
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Bruker SkyScan 1276 MicroCT
| High speed, high resolution ex-vivo and in-vivo micro-CT scanner. Spatial resolution down to 2.8µm ex-vivo and 10µm in-vivo
| CT
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
Bruker AV III 600MHz NMR Spectrometer
| Broad band solution NMR
| Solution NMR Spectrometry
| Chemical and Surface Analysis Lab
| Shifi Kababya/Ira Ben Shir |
| |
|
Bruker AV III 400MHz NMR Spectrometer
| Broad band automated solution NMR
| Solution NMR Spectrometry
| Chemical and Surface Analysis Lab
| Shifi Kababya/Ira Ben Shir |
| |
|
Bruker AV III 300MHz NMR Spectrometer
| 1H 13C 29Si solution NMR
| Solution NMR Spectrometry
| Chemical and Surface Analysis Lab
| Shifi Kababya/Ira Ben Shir |
| |
|
Bruker AFM CellHesion 300
| SmartMapping,Force spectroscopy
| Atomic Force Microscopy
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Bruker 9.4 T MRI
| 9.4 Tesla MRI for in vivo small animal (rodent) anatomical and functional MRI, cardiac imaging, dynamic contrast enhancement, functional brain imaging and angiography.
| MRI
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
Bruker (Tensor 27) Fourier Transform InfraRed (FTIR)
| Bruker (Tensor 27) Fourier Transform InfraRed (FTIR)
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
Briviscop 3000H
| Up to 3000 kgf load with 10mm ball indenter
| Brinell Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Body fluids analysis- Exploris 480 MS
| Identification and quantification of proteins from body fluids
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Biotek Cytation 5
| Automated high content high throughput imaging, live imaging, up to 8 plates
| High Content Imaging
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
