Alox Oxidation Furnace
| Low temp wet oxidation
| Fab
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
|  |
|
Powder distribution system
| M-Flex 2-power distribution system
| Mechanical distributing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Transonic Wind Tunnel
| Mach number 0.2-1.1, test section 80X60 cm, balance measurements, Schlieren
| Aerodynamic measurments
| Technion Wind tunnel Complex
| Michael Dunaevsky | | |
|
Supersonic Tunnel
| Mach number 1.6-3.5, test section 40X50 cm, balance measurements, Schlieren
| Aerodynamic measurments
| Technion Wind tunnel Complex
| Michael Dunaevsky | | |
|
Olympus MVX10M
| Macro zoom microscope. Brightfield and fluorescent specimens
| Macro microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
LEAP 6000 XR APT
| Mass spectometry, MCP detector
| Atom Probe Tomography
| The Israeli Center of Atom Probe Tomography (ICAPT)
| Inbar Freilich |
| |
|
DMA Analyzer
| MCR 702e Multi Drive (Anton Paar) is instrument for the dynamic mechanical analysis of solid, soft, and liquid samples. Perform dynamic mechanical analysis in bending, tension, compression, and torsion, standard and highly sophisticated rheological measurements as well as thermomechanical analysis (TMA) with one instrument.
| DMA analyzer
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
CyTOF Helios
| Measure up to 50 parameters at the single cell level
| Mass Cytometry
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Steam food Autoclave
| Measured Inner Package tmp via Process
| Food Technology - Sterilization
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Spectrophotometer Cary 7000 UMS and UMA
| Measurement of Transparency, Absorbance and Reflectance
| Optical measurment
| RBNI Sputtering Lab
| Andrey Wolf |
| |
|
Glycolysis Stress Test
| Measures the capacity of the glycolytic pathway after glucose starvation.
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Ez-50 LLOYD Universal Material Testing Machine
| Mechanical properties measurement (tension, compression)
| Mechanical Properties - Twin column design with acrosshead travel
| The Russell Berrie Nanoparticles and Nanometric System Characterization Center
| Sigal Eichler |
| |
|
Media nutrients consumption / secretion absolute quantification (Orbitrap Exploris 240/Q Exactive)
| Media nutrients secretome and consumption profiling; including absolute quantification
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Metabolomics Services
| Metabolomics Services
| Metabolomics
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
ATOmizer
| Metal atomization (powders production), flexible material processing
| Atomization
| IMT- Israel Institute of Materials Manufacturing Technologies
| Leonid Chernobylskiy |
| |
|
Micro Tester G2
| Micro- scale compression test system
| Micro scale Mechanical test -Microbeam applies deformations while measuring applied forces
| The Russell Berrie Nanoparticles and Nanometric System Characterization Center
| Sigal Eichler |
| |
|
TriStar Porosity Analyzer
| Micromeritics, measuring BET, pore size / volume of meso porous materials
| TriStar porosimeter
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
3FLEX Porosity Analyzer
| Micromeritics, measuring BET, pore size / volume of micro / meso porous materials
| 3FLEX porosimeter
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
AccuPyc Density Analyzer
| Micromeritics, measuring density of powders, solids, and slurries
| AccuPyc density analyser
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Sonicator
| Microtip for 0.25 - 10ml, cup horn for sterile work, up to 8 x 1.5ml tubes
| Ultrasonic Processor
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Leica DMI8 inverted Fluorescent Microscope
| Monochrome and color camera. Inverted. For fluorescence and histology imaging
| Fluorescence Microscope
| Life Sciences and Engineering Infrastructure Center (LSE)
| Nitsan Dahan |
| |
|
Stereo microscope, Zeiss Discovery V20
| motorized 20X zoom, digital camera and optic polarization
| Microscopy
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
LaboPress-3 Machine
| Mounting press, sample diameter 25 mm.
| Mounting
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Envision TEC GmbH 3D- Bioplotter Manufacturer
| Multi channel bioprinting of cells and biomaterials
| 3D Bioprinting
| 3D Bioprinting Center for printing Cells and Biomaterials
| Galia Ben-David |
| |
|
N-terminus labeling and identification of a protein
| N-terminus labeling and identification of a protein
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
FTIR
| Nicolet iS-50, Thermo, (ATR, FT-IR) 500- 4000cm-1
| FTIR
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Optical Microscope Nikon
| Optical Microscope
| Optical Microscopy
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Ellipsometere J.A. Woollam, M-2000UI
| Optical thickness meeasurment by polarised light
| Optical measurment
| RBNI Sputtering Lab
| Andrey Wolf |
| |
|
Ellipsometer Multi-layer measurements
| Optical thickness meeasurment by polarised light, wave length 193-2500nm (Woollam VASE)
| Optical measurment
| RBNI Sputtering Lab
| Andrey Wolf |
| |
|
Leica RM 2135 Microtome
| Paraffin sectioning
| Microtome
| Biomedical Core Facility (BCF)
| Katren Sakran |
| |
|
Zetasizer Ultra Malvern
| Particle size disribution up to 10 micron,concentration, Zeta potential
| Particle Size Analyzer
| The Russell Berrie Nanoparticles and Nanometric System Characterization Center
| Sigal Eichler |
| |
|
Mastersizer 3000 Malvern
| Particle size disribution up to 3500 micron
| Particle Size Analyzer
| The Russell Berrie Nanoparticles and Nanometric System Characterization Center
| Sigal Eichler |
| |
|
MILabs VECTor7 PET/SPECT/CT/OI
| PET/SPECT/CT/OI system for small animals
| In Vivo Imaging System
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
Phosphoproteome- Exploris 480 MS
| Phosphoproteome-Identification and quantification of enriched phosphopeptides from whole lysates.
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Automatic Coater (Suss MicroTec Delta 80 RC)
| Photolithography coating
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Automatic Developer (Suss MicroTec Delta 8+)
| Photolithography developing
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Contact Mask Aligner (KARL SUSS MA-6)
| Photolithography exposer
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Contact Mask Aligner with BSA (KARL SUSS MJB3)
| Photolithography exposer
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Laser Lithography System
| Photolithography exposer and mask preparation (Heidelberg Instruments DWL 66+)
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Dry Film Laminator (JSE JSL-1200)
| Photolithography film laminator
| Photolithography
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Planetary mono mill (PULVERISETTE 6, Fritsch)
| Planetary Mill is used for fine grinding of hard, medium-hard, soft, brittle, tough and moist materials. The maximum rotational speed of the mill in FC lab is 650 rpm. The minimum volume of a grinded sample is 10 ml. Two grinding bowls, 80 ml and 250 ml volume, and grinding balls of 5mm and 10mm diameter, all made of Zirconium Oxide are available.
| Planetary mono mill
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Plasma Asher (Axic HF-8)
| Plasma clean
| Plasma clean
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Plasma Asher (YES G-1000)
| Plasma clean
| Plasma clean
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Reactive Ion Etching (RIE Plasma Therm 790)
| Plasma dry etch
| Plasma dry
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
ICP Deep RIE (Plasma-Therm Versaline
| Plasma dry etch for deep Si etch, (Fluorine Chemistry)
| Plasma dry
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Polar metabolomics profiling (Orbitrap Exploris 240/Q Exactive)
| Polar metabolites profiling with a in-house library of 550 metabolites - identification and relative quantification in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Struers LaboForce 100 Polishing Machine
| Polishing machine with variable speed for 300 mm dia. disk.
| Polishing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
XRF Thermofisher
| Portable, accurate measurements of metal alloys and coatings
| X-ray fluorescence
| IMT- Israel Institute of Materials Manufacturing Technologies
| Leonid Chernobylskiy |
| |
|
M-FLEX (3D printer)
| Powder bed Binder Jetting 3D printer (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Z-Corp (3D printer)
| Powder bed Binder Jetting 3D printer (Z-Corp)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Powder Mixer
| Powder mixing machine, 30 kg mixing volume.
| Powders blending
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Powder recycler
| Powder sieving machine (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Particle Size and Shape Analyzer Camsizer
| Powder size measurements, range from 0.8 mm to 8 mm.
| Optical system with high resolution
| IMT- Israel Institute of Materials Manufacturing Technologies
| Leonid Chernobylskiy |
| |
|
VH Powder Mixers
| Preparation of powder mixture, capacity 500 liters
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Job box and transfer cart
| Printing table with transfer cart (Ex One. M-Flex)
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Protein Crystallography Data Collection (ESRF)
| Protein crystals data collection at the European Synchrotron Radiation Facility (ESRF)
| Protein Crystallography
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Protein structure determination software
| Protein structure determination software, molecular building and structure analysis
| iMac workstations with software
| Technion Center for Structural Biology (TCSB)
| Yael Pazy Benhar |
| |
|
Real-Time ATP Rate Assay
| Quantification of the rate ATP production from glycolysis and mitochondria simultaneously using label-free technology in live cells
| Real-Time Cell Metabolic Analysis (XFe96 Seahorse Analyzer)
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
IVIS Lumina X5
| Quantitative fluorescence and bioluminescence imagin, with high-resolution 2D X-ray
| In Vivo Imaging System
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
IVIS Spectrum CT
| Quantitative fluorescence and bioluminescence imaging with spectral unmixing and low dose CT imaging
| In Vivo Imaging System
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
Seahorse XFe96 Metabolic Flux Analyzer
| Real-time measurement of cellular metabolism in live cells
| Metabolomics
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Seehorse
| Real-time measurement of cellular metabolism in live cells
| Metabolomics
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
QuantStudio1
| Real-time PCR
| Real-time PCR
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
QuantStudio3
| Real-time PCR
| Real-time PCR
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Sandblasting machine
| Removing rust, paint, corrosion from materials.
| Blasting
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
TA-HR-2 Discovery Hybrid Rheometer
| Rheological properties
| Rheological Characterization - Rotational Rheometer
| The Russell Berrie Nanoparticles and Nanometric System Characterization Center
| Sigal Eichler |
| |
|
Nextseq 2000 (Illumina)
| RNA-seq, miRseq, whole genome- equencing (WGS), ChIP-seq, CEL-seq, Amplicon-seq, 16S, RRBS, Exome
| Next-generation sequencing (NGS)
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Foseco rotary degassing machine
| Rotary degassing of aluminium alloys
| Mechanical distributing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Rotating Ring Disk Electrode (RRDE) -3A Apparatus,
| RRDE-3A is a constant rotation system for use in hydrodynamic modulation rotating ring disk electrochemistry. It could be operated also as RDE. Rotation speed range is 100-8000 rpm. Electrodes are compact and rapidly interchangeable. The unit provides an adjustable valve system for inert gas purging inside the cell vial.The system is connected to VSP potentiostat (BioLogic), allowing performance of electrochemical measurements.
| Rotating Ring Disk Electrode (RRDE)
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Satelite Ground Station
| S-band, VHF/UHF antennas
| Space
| Asher Space Research Institute
| Lee Nudel |
| |
|
Sample Preparation for Biomedical electron microscopy services
| Sample preparation and acquisition for scanning and transmission electron microscopy
| Biological electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Genetic Analyzer 3500XL
| Sanger seqeuncing, human cell line authentication
| Sanger and genotyping
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
Screen printer (MSP-485, HIM)
| Screen printing is a printing technique whereby a mesh is used to transfer ink onto a substrate, except in areas made impermeable to the ink by a blocking stencil. Mesh/stencil is uniq for each work, so every user is requered to prepare his/her own mesh(s) and stencil(s). The maximum printing area is 8 x 8 inch.
| Screen printer
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Shimadzu (UV-1800) Spectrophotometer
| Shimadzu (UV-1800) Spectrophotometer
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
Vibro sieving
| Sieving
| Sieving
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
SILAC or dimethylated proteome analysis-HFX/Exploris 480 MS
| SILAC or dimethylated proteome analysis
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
GPS simulators
| Simulating GPS RF Signals
| Engineering
| Asher Space Research Institute
| Lee Nudel |
| |
|
Combined EEG-fMRI
| Simultaneous EEG-fMRI for human
| EEG-fMRI
| May Blum Dahl Technion Human MRI Research Center (TecH MRC)
| Daphna Link-Sourani |
| |
|
Chromium X (10x Genomics)
| Single cell RNA-seq, single cell TCR/BCR sequencing, multi omics
| Single Cell Technology
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
CosMx (Nanostring)
| Single-cell spatial transcriptomics
| Spatial transcriptomics based on in-situ
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
SLA (3D printer)
| SLA polymer 3D printer
| Bibder Jet 3D printing
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
ATM, Brillant 220
| Small samples, high accuracy, constant cooling
| Metallographic cut-off machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Bruker AFM CellHesion 300
| SmartMapping,Force spectroscopy
| Atomic Force Microscopy
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
CytAssist (10x Genomics)
| Spatial transcriptomics
| Spatial transcriptomics based on NGS
| Azrieli-Technion Genomics Center
| Liat Linde |
| |
|
FACSymphony A5 SE with HTS
| Spectral-enabled cell analyzer. Lasers: 349, 405, 488, 561, 637nm. HTS system
| FACS Analyzer
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
SPF, NON SPF, Quarantine, Biohazard
| SPF, NON SPF, Quarantine
| Animals in research infrastructure
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Spherical array probe
| Spherical array probe for volumetric real-time optoacoustic imaging at several mm-depths
| optoacoustic imaging system
| National Center for Imaging and Brain Stimulation
| Inbar Brosh |
| | |
Infinity Abberior STED Confocal microscop
| Stimulated Emission Depletion (STED) 3D STED and FLIM
| Super Resolution 3D STED
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Image Analysis
| Support for performing complex analyzes and deep learning. Imaris, Image pro premier, ImageJ, Matlab, and Python.
| Image Analysis
| Biomedical Core Facility (BCF)
| Eilam Golan Zagagy |
| |
|
Preclinical Surgery rooms
| Surgery rooms
| Surgery rooms
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Vacuum Furnace SecoWarwick
| Temperature range up to 1200 degrees , advanced cooling options.
| Heat treatment, Vacuum Furnace
| IMT- Israel Institute of Materials Manufacturing Technologies
| Leonid Chernobylskiy |
| |
|
TESCAN (Vega-II) Scanning Electron Microscopy (SEM)
| TESCAN (Vega-II) Scanning Electron Microscopy (SEM)
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
TGA/DSC 3+ system
| TGA/DSC 3+ system (from 20oC up to 1500oC), Mettler Toledo
| TGA/DSC 3+ system
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Membrane Test System (MTS) (Scribner)
| The 740 MTS is intended for studying new ionomers and solid electrolyte materials. It offers rapid and accurate measurements of membrane resistance and conductivity as a function of temperature, humidity and pressure without a need of catalyzing a membrane and preparing a membrane-electrode assembly. The size of a membrane sample that is necessary for a measurement is 6X30 mm.
| Membrane Test System
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
PEM Fuel Cells test stations (850e, Scribner)
| The 850e system is a complete test station for operation and measurement of PEM/DMFC fuel cells. 4 test stations are available in the laboratory. The system can be operated in 5/25/50 A current ranges, maximum load power is 100W. The available cell fixtures are suitable for testing cells with active aresa of 5cm2 and 25 cm2. Three test stations are equipped with a humidifyer bypass for wet/dry testing and with a multygas system for switching between various gases during one test. Two are equiped with automatic back pressure unit.
| PEM Fuel Cells test station
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Atomic Force Microscope with electrochemical capabilities
| The Cypher ES Environmental AFM provides an exceptional performance in resolution, speed and stability in standard contact and tapping modes. It is compatible with a complete range of modes and accessories. In addition, it enables studying samples in controlled gas or liquid environments, doing electrochemical experiments and measuring conductivity of samples.
| AFM
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Rigaku XtaLAB Synergy-S
| The Cypher ES Environmental AFM provides an exceptional performance in resolution, speed and stability in standard contact and tapping modes. It is compatible with a complete range of modes and accessories. In addition, it enables studying samples in controlled gas or liquid environments, doing electrochemical experiments and measuring conductivity of samples.
| X-ray diffraction
| Chemical and Surface Analysis Lab
| Natalia Fridman |
| |
|
Glove Box (VTI)
| The glove box provides a high quality controlled environment, designed for handling materials sensitive to oxygen and water. The attainable purity of this system is H2O < 1ppm, O2 < 1ppm. The workstation is equipped with large and small antechambers and a user-friendly PLC controller.
| Glove Box
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
Carbolite Gero furnace HTK 25 GR
| The graphite furnace operates with vacuum or gases Nitrogen / Argon. Max. temp. 2200 °C
| Heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Solid Oxide Fuel Cells test station (X-20, Greenlight)
| The Greenlight X20 SOFC test station is a testing platform that is equipped with a button cell fixture for testing coin cell samples of 25mm diameter. The maximum temperature of tests is 1000 °C. The power range of the test station is up to 100W.
| Solid Oxide Fuel Cells test station
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
