AutoChem II 2920 Chemisorption Analyzer
| The instrument enables the researcher to obtain valuable information about the physical properties of catalysts, catalyst support, and a variety of other materials. Researchers can investigate active metal surface area, surface acidity, distribution and strength of active sites, BET surface area, and more. The AutoChem II performs pulse chemisorption, temperature-programmed reduction (TPR), desorption (TPD), oxidation (TPO), and reaction analyses. Multiple experiments can be run using the same sample.
| Chemisorption Analyzer
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
|  |
|
Materials Manufacturing Technologies
| The Israel institute of Materials Manufacturing Technologies
| The Israel institute of Materials Manufacturing Technologies
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Nicolet iS50 FTIR Spectrometer (Thermo Scientific)
| The Nicolet iS50 FTIR is equipped with VeeMAX III specular reflection accessory with ATR (PIKE Technologies), offering continuous variable angle of incidence and a variety of crystal plates to selectively control the depth of penetration of the IR beam into the sample. ATR applications include the study of layered samples, coatings, release agents, monolayers on silicon and chemical migration studies.
| FTIR
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Kelvin Probe (NRH020 KP Technologies)
| The Nitrogen Relative Humidity Chamber is equipped with a non-scanning Kelvin Probe, which is a non-contact, non-destructive vibrating capacitor device used to measure the work function of conducting materials or surface potential of semiconductors. This system is equipped with a high intensity monochromator light source (Horiba Jobin Yvon S.A.S) that enables measuring CPD at different wavelengths.
| Kelvin Probe
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Solar Simulator (Abet, USA)
| The Solar Simulator is a light source for testing photoelectrodes and photocatalysts under standard illumination conditions.
| Solar Simulator
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Vapor Sorption Analyser (VTA-SA+, TA instruments)
| The VTI-SA+ Vapor Sorption Analyzer is a continuous vapor flow sorption instrument for obtaining precision water and organic vapor isotherms at temperatures ranging from 5°C to 150°C at ambient pressure. The maximum weight of a sample that can be tested is 750mg.
| Vapor Sorption Analyser
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
HVOF coating machine
| Thermal spray system
| HVOF technology
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Thermo Scientific CHNS Analyzer (Flash2000)
| Thermo Scientific CHNS Analyzer (Flash2000)
| Chemical and Surface Analysis
| Chemical and Surface Analysis Lab
| Rachel Edrei |
| |
|
TGA SETSYS Evolution
| Thermogravimetry analysis- The system is equipped with a microbalance that has a capacity of 35g (electronic resolution 0.02mg), temperature range of ambient to 1600°C with scanning temperature rate from 0.01 to 99.99°C/min, and an advanced gas panel, which allows mixing a carrier gas with an auxiliary/reactive gas.
| TGA
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
Ultramicrotome Leica EM UC7
| Thin Sections at Room and Cryo Temperatures
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Leica UC7 Ultramicrotome
| Thin sections preparation for TEM, surface polishing of SEM samples.
| Electron microscopy specimen preparation
| Technion Center for Electron Microscopy of Soft Matter
| Ellina Kesselman |
| |
|
TOFSIMS (ION-TOF)
| Time of Flight- SIMS (TOF-SIMS)
| Mass Spectrometry
| Surface Science Characterization Center
| Shaul Michaelson |
| |
|
Histology Services Laboratory
| Tissue processing, paraffin and frozen sectioning, staining
| Histology Services Laboratory
| Biomedical Core Facility (BCF)
| Katren Sakran |
| |
|
Automated Solid-Phase Extraction (SPE)
| To purify and / or concentrate certain compounds in a liquid mixture (prior to chromatographic analysis)
| Solid-Phase Extraction (SPE)
| The Center for Research in Environmental Engineering,
Analytical Laboratory for Micro-Pollutants
| Nura Azzam |
| | |
Varioskan LUX
| Top and Bottom FL , Abs (200-1000nm), Lum (360-670nm)
| Multimode Microplate Reader-Double monochromator
| The Russell Berrie Nanoparticles and Nanometric System Characterization Center
| Sigal Eichler |
| |
|
TEM - FEI Talos L120C
| Transmission electron microscope
| Electron microscopy
| Biomedical Core Facility (BCF)
| Lihi Shaulov |
| |
|
Tube Furnaces for annealing
| Tube Furnaces for annealing (BTI-Bruce RTRI-878)
| Thermal annealing
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Tube Furnaces for Dry Oxidation
| Tube Furnaces for Dry Oxidation (BTI-Bruce RTRI-878)
| Dry oxidation
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Tube Furnaces for Poly-Si deposition
| Tube Furnaces for Poly-Si deposition (BTI-Bruce RTRI-878)
| Poly-Si film deposition
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Bruker Ultima 2-Photon Plus
| Tunable laser (680–1300 nm) and Fixed output: 1045 nm, 4 GaAsP PMT channels, Galvo and resonant scanners, ETL focus
| 2 Photon
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
Two photon microscope
| Two photon microscope for ultra-rapid volumetric in vivo imaging and stimulation
| Multiphoton Microscope
| National Center for Imaging and Brain Stimulation
| Inbar Brosh |
| | |
Ubiquitinome- Exploris 480 MS
| Ubiquitinome- Identification and quantification of enriched ubiquitinated peptides from whole lysates.
| Mass Spectrometry
| The Smoler Proteomics Center
| Tamar Ziv |
| |
|
Plasma-Assisted Atomic Layer Deposition
| Ultratech/ Cambridge Nanotech Fiji G2
| Film deposition
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Untargeted metabolomics (Orbitrap Exploris 240)
| Untargeted analysis (polar/non polar metabolites); metabolic phenotype in diverse sample types
| Mass Spectrometry
| Biomedical Core Facility (BCF)
| Ifat Abramovich |
| |
|
Instron 8801
| Up to 100 kN, tensile / bending / compression / fatigue/ K1c
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron Electropuls E3000
| Up to 1kN/3 kN,
tensile / bending / compression / fatigue
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron 4400R
| Up to 250 kN, tensile / bending / compression
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron 8802
| Up to 250 kN, tensile / bending / compression / fatigue / K1c
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Briviscop 3000H
| Up to 3000 kgf load with 10mm ball indenter
| Brinell Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Instron 3369
| Up to 50 kN, tensile / bending / compression [+environmental chamber (from -100 to 300 deg.C)]
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Plate Heat Exchanger
| Up to 6 lit/min, 100 °C
| Food Technology - Pasteur
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
HPP
| Up to 8000 bar
| Food Technology - High pressure processing
| Carasso FoodTech Innovation Center
| Yair Glick |
| |
|
Nikon, LV150
| Up to X1000, brightfield, darkfield, contrast.
| Optical microscope
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Axio Imager Z2 upright
| Upright microscope. Suited for fixed specimens. Motorized stage and X-cite metal halide light illumination, High resolution monochrome Zeiss Axiocam 807 camera , and Zeiss Axiocam 105 color camera for brightfield and polarized light.
| Fluorescence Microscope
| Biomedical Core Facility (BCF)
| Maya Holdengreber |
| |
|
IDEXX Vetlab UA
| Urinary Analyzer
| Blood and Urinary Lab
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
GE Vivid E9 4d US
| US
| US
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
GE Vivid S70N US, Cardiac, ICE, TEE
| US, Cardiac, ICE, TEE
| US, Cardiac, ICE, TEE
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
GE Vivid Vivid IQ US, Cardiac, ICE.
| US, Cardiac, ICE.
| US, Cardiac, ICE.
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Drilling machine
| Used to cut holes in a workpiece
| Drilling
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Spray dryer
| Used to dry liquids to powder by means of an atomizer.
| Powders granulation
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Vim Furnace
| Vacuum induction melting furnace. Max. temp. 1600 °C
| Induction heating
| IMT- Israel Institute of Materials Manufacturing Technologies
| Alex Katz |
| |
|
Ellipsometer Multi-layer measurements
| Wave length 193-2500nm
| Film thickness and refractive index measurement
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
The Historical Archive
| X-ray diffraction of the organic compounds - Mo and Cu radiation sources
| Library Services
| Technion libraries
| Moti Yeger | | |
|
Film Processor
| X-ray film processor - For radioactive and ECL membranes
| Film developing processor
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
X-rad 320 Irradiator
| X-ray irradiation system for small animals nd biological specimens, capable of delivering a precise radiation dosage.
| X-ray irradiation system
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
Xray Photoelectron Spectroscopy (XPS, VersaProbe III)
| XRay Photoelectron Spectroscopy (XPS)
| XRay Spectroscopy
| Surface Science Characterization Center
| Kamira Cohen Weinfeld |
| |
|
TECNIPLAST ZEB TEC+ZEBTEC Active-Blue stand alone
| Zebrafish facility
| Zebrafish infrastructure
| Zebra Fish Infrastructure
| Inbar Brosh |
| | |
