Surface Profiler (KLA Tencor 500)
| | Surface profiler
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
|  |
|
Surface Profiler (KLA Tencor P-6)
| | Surface profiler
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Preclinical Surgery rooms
| Surgery rooms
| Surgery rooms
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
TeraCyte
| high-throughput Temporal Cytometry platform designed for longitudinal, single-cell analysis of live cells
| Temporal Cytometry
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Instron 1342 (Hydraulic )
| 10kN, 20Hz, +\- 60 mm
| Tensile machine
| The Materials Mechanics Center
| Ziv keren | | |
|
Instron 3369
| Up to 50 kN, tensile / bending / compression [+environmental chamber (from -100 to 300 deg.C)]
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron 4400R
| Up to 250 kN, tensile / bending / compression
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron 4483 (Screw Driven )
| 150kN, +\- 2m
| Tensile machine
| The Materials Mechanics Center
| Ziv keren | | |
|
Instron 8801
| Up to 100 kN, tensile / bending / compression / fatigue/ K1c
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron 8802
| Up to 250 kN, tensile / bending / compression / fatigue / K1c
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
Instron E10K (electric)
| linear: 10kN,100Hz, +\- 30mm; Torsion: 100Nm,100Hz, +\- 135o rotation
| Tensile machine
| The Materials Mechanics Center
| Ziv keren | | |
|
Instron Electropuls E3000
| Up to 1kN/3 kN,
tensile / bending / compression / fatigue
| Tensile machine
| IMT- Israel Institute of Materials Manufacturing Technologies
| Roman Biletskiy |
| |
|
MTS 656 (Hydraulic )
| 250kN, 25Hz, +\- 75mm
| Tensile machine
| The Materials Mechanics Center
| Ziv keren | | |
|
TGA SETSYS Evolution
| Thermogravimetry analysis- The system is equipped with a microbalance that has a capacity of 35g (electronic resolution 0.02mg), temperature range of ambient to 1600°C with scanning temperature rate from 0.01 to 99.99°C/min, and an advanced gas panel, which allows mixing a carrier gas with an auxiliary/reactive gas.
| TGA
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
TGA/DSC 3+ system
| TGA/DSC 3+ system (from 20oC up to 1500oC), Mettler Toledo
| TGA/DSC 3+ system
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Materials Manufacturing Technologies
| The Israel institute of Materials Manufacturing Technologies
| The Israel institute of Materials Manufacturing Technologies
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Optris PI-08M
| Compact infrared camera for laser applications. Spectral range 780 – 820 nm. Temperature range 575 °C ... 1900 °C
| Thermal analysis
| IMT- Israel Institute of Materials Manufacturing Technologies
| Aleksey Kovalevsky |
| |
|
Rapid Thermal Annealing (JetFirst 200HT)
| | Thermal annealing
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Tube Furnaces for annealing
| Tube Furnaces for annealing (BTI-Bruce RTRI-878)
| Thermal annealing
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
TOC; TN Analyzer
| high-temperature catalytic combustion to oxidize and convert organic compounds present in aqueous samples to CO2 TN: high-temperature combustion/ Chemiluminescence Detector. Determination of organic carbon, inorganic carbon, and Total Nitrogen content
| TOC
| The Center for Research in Environmental Engineering,
Analytical Laboratory for Micro-Pollutants
| Nura Azzam |
| | |
HRTEM - FEI Titan Cubed Themis G2 60-300
| Double corrected, Monochromated, EDS, EELS, In-situ holders, 4D-STEM
| Transmission electron microscopy
| EMC - The Electron Microscopy Center
| Yaron Kauffmann |
| |
|
TEM - FEI Tecnai G2 T20 S-Twin TEM
| EDS, STEM
| Transmission electron microscopy
| EMC - The Electron Microscopy Center
| Yaron Kauffmann |
| |
|
Thermo Fisher (FEI) Talos 200C HRTEM, Cryo-(S)TEM and HR(S)TEM
| cryo-TEM, HR-TEM, STEM, and tilt-series tomography (TEM, STEM and cryo-). Direct detector cameras and Volta phase plates.
| Transmission electron microscopy
| Technion Center for Electron Microscopy of Soft Matter
| Olga Kleinerman |
| |
|
TriStar Porosity Analyzer
| Micromeritics, measuring BET, pore size / volume of meso porous materials
| TriStar porosimeter
| The Lab for Physical Measurements, physical properties of materials
| Inna Zeltser |
| |
|
Ultracentrifuge Sorvall WX90
| 90000 rpm, 692149 x g
| Ultracentrifuge
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Sonicator
| Microtip for 0.25 - 10ml, cup horn for sterile work, up to 8 x 1.5ml tubes
| Ultrasonic Processor
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Ultrasonic Spray Deposition (ExactaCoat, Sono-Tek)
| A fully-enclosed, programmable 3-axis robot integrated ultrasonic spraying system designed for depositing active layer solutions to produce thin film.
| Ultrasonic Spray Deposition
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| |
|
GE Vivid E9 4d US
| US
| US
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
GE Vivid S70N US, Cardiac, ICE, TEE
| US, Cardiac, ICE, TEE
| US, Cardiac, ICE, TEE
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
GE Vivid Vivid IQ US, Cardiac, ICE.
| US, Cardiac, ICE.
| US, Cardiac, ICE.
| Pre Clinical Research Authority
| Dvir Mintz |
| |
|
Vapor Sorption Analyser (VTA-SA+, TA instruments)
| The VTI-SA+ Vapor Sorption Analyzer is a continuous vapor flow sorption instrument for obtaining precision water and organic vapor isotherms at temperatures ranging from 5°C to 150°C at ambient pressure. The maximum weight of a sample that can be tested is 750mg.
| Vapor Sorption Analyser
| GTEP Fuel Cells Lab
| Irena Levin |
| |
|
FutureTech, FV-110
| Automatic meaurement, from 1kgf up to 100kgf load
| Vickers Hardness Tester
| IMT- Israel Institute of Materials Manufacturing Technologies
| Keren Zohar Hauber |
| |
|
Dr. Natalie Shaffer distance learning studio
| | Video productions
| The Center for Promotion of Learning and Teaching
| Olga Chuntonov | | |
|
Polak family distance learning studio
| | Video productions
| The Center for Promotion of Learning and Teaching
| Olga Chuntonov | | |
|
Biosafety Level 2+ Virus Room
| Biosafety level 2+ virus room
| Virus Room
| Biomedical Core Facility (BCF)
| Amir Grau |
| |
|
Viscometer (Viscotech Myr VR 3000)
| | Viscometer
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
PEM and AEM Water Electrolyzers
| Comprehensive testing of membrane and catalyst integration under controlled conditions to evaluate performance metrics such as current density, efficiency, and durability.
Hardware size: up to 5 cm2.
| Water Electrolyzers
| GTEP Hydrogen Technologies Lab
| Karam Yassin |
| | |
Wave Basin
| CAMERI -Coastal and Marine Engineering Research Institute
| Wave Basin
| CAMERI- Coastal and Marine Engineering Research Institute Ltd.
| Rotem Cohen |
| |
|
OPA6 14kW Laser
| High power 14Kw fiber CW laser (Civan). 1064 nm wavelength, dinamic beam shape feature
| Welding, Cutting, Surface Hardening, Energy process simulations,
| IMT- Israel Institute of Materials Manufacturing Technologies
| Aleksey Kovalevsky |
| |
|
Wire Bonder (TPT HB16)
| | Wire bonding
| MNFU - Micro-Nanoelectronics Fabrication Unit
| Yana Milyutin |
| |
|
Rigaku SmartLab 9kW
| Cu radiation source - X-ray diffraction for powders, thin films or bulk. In-situ heating and cooling, in-plane, rocking curve, pole figure, reflectivity, SAXS, GI-WAXS.
| X-ray diffraction
| X-Ray Diffraction Laboratory, Materials Science and Engineering
| Yael Etinger Geller |
| |
|
Rigaku XtaLAB Synergy-S
| The Cypher ES Environmental AFM provides an exceptional performance in resolution, speed and stability in standard contact and tapping modes. It is compatible with a complete range of modes and accessories. In addition, it enables studying samples in controlled gas or liquid environments, doing electrochemical experiments and measuring conductivity of samples.
| X-ray diffraction
| Chemical and Surface Analysis Lab
| Natalia Fridman |
| |
|
XRF Thermofisher
| Portable, accurate measurements of metal alloys and coatings
| X-ray fluorescence
| IMT- Israel Institute of Materials Manufacturing Technologies
| Leonid Chernobylskiy |
| |
|
X-rad 320 Irradiator
| X-ray irradiation system for small animals nd biological specimens, capable of delivering a precise radiation dosage.
| X-ray irradiation system
| Biomedical Core Facility (BCF)
| Galit Saar |
| |
|
Rigaku diffractometer
| Determination of the crystal structures of the small organic molecules
| X-ray lab
| Chemical and Surface Analysis Lab
| Natalia Fridman |
| |
|
Xray Photoelectron Spectroscopy (XPS, VersaProbe III)
| XRay Photoelectron Spectroscopy (XPS)
| XRay Spectroscopy
| Surface Science Characterization Center
| Kamira Cohen Weinfeld |
| |
|
TECNIPLAST ZEB TEC+ZEBTEC Active-Blue stand alone
| Zebrafish facility
| Zebrafish infrastructure
| Zebra Fish Infrastructure
| Inbar Brosh |
| | |
